This diff changes the algorithm used by webconnectivity's
httpanalysis.go to ignore any status code <= 0 rather
than just ignoring the == 0 case.
Make sure we add test cases for when the control's status
code is negative rather than being zero.
While there, simplify code where boolean checks could be
more compact according to staticcheck.
Closes https://github.com/ooni/probe/issues/1825
This change should simplify the pipeline's job.
Reference issue: https://github.com/ooni/probe/issues/1817.
I previously dismissed this possibility, but now it seems clear it
is simpler to have a very tabular data format internally and to
convert such a format to OONI's data format when serializing.
The OONI data format is what the pipeline expects, but processing
is easier with a more linear/tabular format.
This diff adds the prototype websteps implementation that used
to live at https://github.com/ooni/probe-cli/pull/506.
The code is reasonably good already and it's pointing to a roaming
test helper that I've properly configured.
You can run websteps with:
```
./miniooni -n websteps
```
This will go over the test list for your country.
At this stage the mechanics of the experiment is set, but we
still need to have a conversation on the following topics:
1. whether we're okay with reusing the data format used by other
OONI experiments, or we would like to use a more compact data
format (which may either be a more compact JSON or we can choose
to always submit compressed measurements for websteps);
2. the extent to which we would like to keep the measurement as
a collection of "the experiment saw this" and "the test helper
saw that" and let the pipeline choose an overall score: this is
clearly an option, but there is also the opposite option to
build a summary of the measurement on the probe.
Compared to the previous prototype of websteps, the main
architectural change we have here is that we are following
the point of view of the probe and the test helper is
much more dumb. Basically, the probe will choose which
redirection to follow and ask the test helper every time
it discovers a new URL to measure it w/o redirections.
Reference issue: https://github.com/ooni/probe/issues/1733
When preparing a tutorial for netxlite, I figured it is easier
to tell people "hey, this is the package you should use for all
low-level networking stuff" rather than introducing people to
a set of packages working together where some piece of functionality
is here and some other piece is there.
Part of https://github.com/ooni/probe/issues/1591
We need still to add similar wrappers to internal/netxlite but we
will adopt a saner approach to error wrapping this time.
See https://github.com/ooni/probe/issues/1591
The legacy part for now is internal/errorsx. It will stay there until
I figure out whether it also needs some extra bug fixing.
The good part is now in internal/netxlite/errorsx and contains all the
logic for mapping errors. We need to further improve upon this logic
by writing more thorough integration tests for QUIC.
We also need to copy the various dialer, conn, etc adapters that set
errors. We will put them inside netxlite and we will generate errors in
a way that is less crazy with respect to the major operation. (The
idea is to always wrap, given that now we measure in an incremental way
and we don't measure every operation together.)
Part of https://github.com/ooni/probe/issues/1591
Like before, do not touch the rest of the tree. Rather create
compatibility types declared as legacy.
We will soon be able to close idle connections for an HTTP3
transport using any kind of resolvers more easily.
See https://github.com/ooni/probe/issues/1591
This basically adapts already existing code inside websteps to
instead be into the netxlite package, where it belongs.
In the process, abstract the TLSDialer but keep a reference to the
previous name to avoid refactoring existing code (just for now).
While there, notice that the right name is CloseIdleConnections (i.e.,
plural not singular) and change the name.
While there, since we abstracted TLSDialer to be an interface, create
suitable factories for making a TLSDialer type from a Dialer and a
TLSHandshaker.
See https://github.com/ooni/probe/issues/1591
Like we did before for the resolver, a dialer should propagate the
request to close idle connections to underlying types.
See https://github.com/ooni/probe/issues/1591
* fix(netxlite): make default resolver converge faster
Closes https://github.com/ooni/probe/issues/1726
* Update internal/netxlite/resolver.go
* fix(ndt7): adapt tests after previous change
Because now we're running the DNS resolution inside a goroutine
with a child context, the returned error string is different.
The previous error said we canceled the whole dialing operation,
while now we see directly that the context was canceled.
We would like to refactor the code so that a DoH resolver owns the
connections of its underlying HTTP client.
To do that, we need first to incorporate CloseIdleConnections
into the Resolver model. Then, we need to add the same function
to all netxlite types that wrap a Resolver type.
At the same time, we want the rest of the code for now to continue
with the simpler definition of a Resolver, now called ResolverLegacy.
We will eventually propagate this change to the rest of the tree
and simplify the way in which we manage Resolvers.
To make this possible, we introduce a new factory function that
adapts a ResolverLegacy to become a Resolver.
See https://github.com/ooni/probe/issues/1591.
## Description
This PR continues the refactoring of `netx` under the following principles:
1. do not break the rest of the tree and do not engage in extensive tree-wide refactoring yet
2. move under `netxlite` clearly related subpackages (e.g., `iox`, `netxmocks`)
3. move into `internal/netxlite/internal` stuff that is clearly private of `netxlite`
4. hide implementation details in `netxlite` pending new factories
5. refactor `tls` code in `netxlite` to clearly separate `crypto/tls` code from `utls` code
After each commit, I run `go test -short -race ./...` locally. Each individual commit explains what it does. I will squash, but this operation will preserve the original commit titles, so this will give further insight on each step.
## Commits
* refactor: rename netxmocks -> netxlite/mocks
Part of https://github.com/ooni/probe/issues/1591
* refactor: rename quicx -> netxlite/quicx
See https://github.com/ooni/probe/issues/1591
* refactor: rename iox -> netxlite/iox
Regenerate sources and make sure the tests pass.
See https://github.com/ooni/probe/issues/1591.
* refactor(iox): move MockableReader to netxlite/mocks
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): generator is an implementation detail
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): separate tls and utls code
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): hide most types but keep old names as legacy
With this change we avoid breaking the rest of the tree, but we start
hiding some implementation details a bit. Factories will follow.
See https://github.com/ooni/probe/issues/1591
The quic-go library does not support it anymore. So, let us be consistent
and remove any reference to h3-29 from our codebase.
Closes https://github.com/ooni/probe/issues/1740.
This diff enables `websteps` to use uTLS for TLS parroting. It integrates the `oohttp.StdlibTransport` wrapper which uses the `ooni/oohttp` fork. `oohttp` supports TLS-like connections like `utls.Conn`.
As a prototype, the testhelper and `websteps` code now uses the `utls.HelloChrome_Auto` fingerprint, i.e. the simulated TLS fingerprint of the Google Chrome browser.
It is a further contribution for my GSoC project.
Reference issue: https://github.com/ooni/probe/issues/1733
This is the extension of https://github.com/ooni/probe-cli/pull/431, and my final deliverable for GSoC 2021.
The diff introduces:
1) The new `testhelper` which supports testing multiple IP endpoints per domain and introduces HTTP/3 control measurements. The specification of the `testhelper` can be found at https://github.com/ooni/spec/pull/219. The `testhelper` algorithm consists of three main steps:
* `InitialChecks` verifies that the input URL can be parsed, has an expected scheme, and contains a valid domain name.
* `Explore` enumerates all the URLs that it discovers by redirection from the original URL, or by detecting h3 support at the target host.
* `Generate` performs a step-by-step measurement of each discovered URL.
2) A prototype of the corresponding new experiment `websteps` which uses the control measurement of the `testhelper` to know which URLs to measure, and what to expect. The prototype does not yet have:
* unit and integration tests,
* an analysis tool to compare the control and the probe measurement.
This PR is my final deliverable as it is the outcome of the trials, considerations and efforts of my GSoC weeks at OONI.
It fully integrates HTTP/3 (QUIC) support which has been only used in the `urlgetter` experiment until now.
Related issues: https://github.com/ooni/probe/issues/1729 and https://github.com/ooni/probe/issues/1733.
What do I mean by pivoting? Netx is currently organized by row:
```
| dialer | quicdialer | resolver | ...
saving | | | | ...
errorwrapping | | | | ...
logging | | | | ...
mocking/sys | | | | ...
```
Every row needs to implement saving, errorwrapping, logging, mocking (or
adapting to the system or to some underlying library).
This causes cross package dependencies and, in turn, complexity. For
example, we need the `trace` package for supporting saving.
And `dialer`, `quickdialer`, et al. need to depend on such a package.
The same goes for errorwrapping.
This arrangement further complicates testing. For example, I am
currently working on https://github.com/ooni/probe/issues/1505 and
I realize it need to repeat integration tests in multiple places.
Let's say instead we pivot the above matrix as follows:
```
| saving | errorwrapping | logging | ...
dialer | | | | ...
quicdialer | | | | ...
logging | | | | ...
mocking/sys | | | | ...
...
```
In this way, now every row contains everything related to a specific
action to perform. We can now share code without relying on extra
support packages. What's more, we can write tests and, judding from
the way in which things are made, it seems we only need integration
testing in `errorwrapping` because it's where data quality matters
whereas, in all other cases, unit testing is fine.
I am going, therefore, to proceed with these changes and "pivot"
`netx`. Hopefully, it won't be too painful.
We are not using them anymore. The only nettest still using the
legacy netx implementation is tor, for which setting these fields
is useless, because it performs each measurement into a separate
goroutine. Hence, let us start removing this part of the legacy
netx codebase, which is hampering progress in other areas.
Occurred to me while doing testing for the recent changes in
error mapping (https://github.com/ooni/probe/issues/1505).
* refactor: move scrubbingLogger to the scrubber pkg
We need it exported so we can use it in the new implementation.
Part of https://github.com/ooni/probe/issues/1687
* fix test
The current implementation assumes the user has already installed tor
on the current system. If tor is not present, the experiment fails.
This is meant to be the first version of this experiment.
We are going to add more functionality in subsequent revisions of
this experiment, once we've collected more feedback.
Reference issue: https://github.com/ooni/probe/issues/1565.
Here's the spec PR: https://github.com/ooni/spec/pull/218.
Here's the issue tracking future work: https://github.com/ooni/probe/issues/1686
* fix(all): introduce and use iox.CopyContext
This PR is part of https://github.com/ooni/probe/issues/1417.
In https://github.com/ooni/probe-cli/pull/379 we introduced a context
aware wrapper for io.ReadAll (formerly ioutil.ReadAll).
Here we introduce a context aware wrapper for io.Copy.
* fix(humanize): more significant digits
* fix: rename humanize files to follow the common pattern
* fix aligment
* fix test
* fix(all): introduce and use iox.ReadAllContext
This improvement over the ioutil.ReadAll utility returns early
if the context expires. This enables us to unblock stuck code in
case there's censorship confounding the TCP stack.
See https://github.com/ooni/probe/issues/1417.
Compared to the functionality postulated in the above mentioned
issue, I choose to be more generic and separate limiting the
maximum body size (not implemented here) from using the context
to return early when reading a body (or any other reader).
After implementing iox.ReadAllContext, I made sure we always
use it everywhere in the tree instead of ioutil.ReadAll.
This includes many parts of the codebase where in theory we don't
need iox.ReadAllContext. Though, changing all the places makes
checking whether we're not using ioutil.ReadAll where we should
not be using it easy: `git grep` should return no lines.
* Update internal/iox/iox_test.go
* fix(ndt7): treat context errors as non-errors
The rationale is explained by the comment documenting reduceErr.
* Update internal/engine/experiment/ndt7/download.go
* refactor(netx/dialer): hide implementation complexity
This follows the blueprint of `module.Config` and `nodule.New`
described at https://github.com/ooni/probe/issues/1591.
* fix: ndt7 bug where we were not using the right resolver
* fix(legacy/netx): clarify irrelevant implementation change
* fix: improve comments
* fix(hhfm): do not use dialer.New b/c it breaks it
Unclear to me why this is happening. Still, improve upon the
previous situation by adding a timeout.
It does not seem a priority to look into this issue now.
We already configure a timeout in the underlying dialer, hence
there's no point in keeping the TimeoutDialer around.
Part of https://github.com/ooni/probe/issues/1507
We're currently use jafar for QA and jafar is a better mechanism,
even though it is not portable outside of Linux.
This self censorship mechanism was less cool and added a bunch
of (also cognitive) complexity to netx.
If we ever want to go down a self censorship like road, we probably
want to do as little work as possible in the problem and as much
work as possible inside a helper like jafar.
Part of https://github.com/ooni/probe/issues/1591.
* refactor(atomicx): move outside the engine package
After merging probe-engine into probe-cli, my impression is that we have
too much unnecessary nesting of packages in this repository.
The idea of this commit and of a bunch of following commits will instead
be to reduce the nesting and simplify the structure.
While there, improve the documentation.
* fix: always use the atomicx package
For consistency, never use sync/atomic and always use ./internal/atomicx
so we can just grep and make sure we're not risking to crash if we make
a subtle mistake on a 32 bit platform.
While there, mention in the contributing guidelines that we want to
always prefer the ./internal/atomicx package over sync/atomic.
* fix(atomicx): remove unnecessary constructor
We don't need a constructor here. The default constructed `&Int64{}`
instance is already usable and the constructor does not add anything to
what we are doing, rather it just creates extra confusion.
* cleanup(atomicx): we are not using Float64
Because atomicx.Float64 is unused, we can safely zap it.
* cleanup(atomicx): simplify impl and improve tests
We can simplify the implementation by using defer and by letting
the Load() method call Add(0).
We can improve tests by making many goroutines updated the
atomic int64 value concurrently.
* refactor(fsx): can live in the ./internal pkg
Let us reduce the amount of nesting. While there, ensure that the
package only exports the bare minimum, and improve the documentation
of the tests, to ease reading the code.
* refactor: move runtimex to ./internal
* refactor: move shellx into the ./internal package
While there, remove unnecessary dependency between packages.
While there, specify in the contributing guidelines that
one should use x/sys/execabs instead of os/exec.
* refactor: move ooapi into the ./internal pkg
* refactor(humanize): move to ./internal and better docs
* refactor: move platform to ./internal
* refactor(randx): move to ./internal
* refactor(multierror): move into the ./internal pkg
* refactor(kvstore): all kvstores in ./internal
Rather than having part of the kvstore inside ./internal/engine/kvstore
and part in ./internal/engine/kvstore.go, let us put every piece of code
that is kvstore related into the ./internal/kvstore package.
* fix(kvstore): always return ErrNoSuchKey on Get() error
It should help to use the kvstore everywhere removing all the
copies that are lingering around the tree.
* sessionresolver: make KVStore mandatory
Simplifies implementation. While there, use the ./internal/kvstore
package rather than having our private implementation.
* fix(ooapi): use the ./internal/kvstore package
* fix(platform): better documentation
* urlgetter: fix tunnel test
This diff fixes the urlgetter test suite to make sure we
are correctly testing for tunnel creation.
While there, improve the way in which we create a testing
directory and add a test for that.
Part of https://github.com/ooni/probe/issues/985.
* fix comment
* fix comment
* feat: create tunnel inside NewSession
We want to create the tunnel when we create the session. This change
allows us to nicely ignore the problem of creating a tunnel when we
already have a proxy, as well as the problem of locking. Everything is
happening, in fact, inside of the NewSession factory.
Modify miniooni such that --tunnel is just syntactic sugar for
--proxy, at least for now. We want, in the future, to teach the
tunnel to possibly use a socks5 proxy.
Because starting a tunnel is a slow operation, we need a context in
NewSession. This causes a bunch of places to change. Not really a big
deal except we need to propagate the changes.
Make sure that the mobile code can create a new session using a
proxy for all the APIs we support.
Make sure all tests are still green and we don't loose coverage of
the various ways in which this code could be used.
This change is part of https://github.com/ooni/probe/issues/985.
* changes after merge
* fix: only keep tests that can hopefully work
While there, identify other places where we should add more
tests or fix integration tests.
Part of https://github.com/ooni/probe/issues/985
* feat(tunnel): introduce persistent tunnel state dir
This diff introduces a persistent state directory for tunnels, so that
we can bootstrap them more quickly after the first time.
Part of https://github.com/ooni/probe/issues/985
* fix: make tunnel dir optional
We have many tests where it does not make sense to explicitly
provide a tunnel dir because we're not using tunnels.
This should simplify setting up a session.
* fix(tunnel): repair tests
* final changes
* more cleanups
