* Upgrade to github.com/upper/db/v4
* fix(oonitest): repair imports after merge
Oops, okay, it seems the merge did not preserve all the import
changes, so let's ensure we use the right imports here!
* cleanup(go.mod): don't refer to upper.io/db/v3
These lines didn't disappear previously because the merge commit
failed to remove all references to upper.io/db/v3.
Co-authored-by: stergem <sgemelas@protonmail.com>
Co-authored-by: Simone Basso <bassosimone@gmail.com>
* quic-go upgrade: replaced Session/EarlySession with Connection/EarlyConnection
* quic-go upgrade: added context to RoundTripper.Dial
* quic-go upgrade: made corresponding changes to tutorial
* quic-go upgrade: changed sess variable instances to qconn
* quic-go upgrade: made corresponding changes to tutorial
* cleanup: remove unnecessary comments
Those comments made sense in terms of illustrating the changes
but they're going to be less useful once we merge.
* fix(go.mod): apparently we needed `go1.18.1 mod tidy`
VSCode just warned me about this. It seems fine to apply this
change as part of the pull request at hand.
* cleanup(netxlite): http3dialer can be removed
We used to use http3dialer to glue a QUIC dialer, which had a
context as its first argument, to the Dial function used by the
HTTP3 transport, which did not have a context as its first
argument.
Now that HTTP3 transport has a Dial function taking a context as
its first argument, we don't need http3dialer
anymore, since we can use the QUIC dialer directly.
Cc: @DecFox
* Revert "cleanup(netxlite): http3dialer can be removed"
This reverts commit c62244c620cee5fadcc2ca89d8228c8db0b96add
to investigate the build failure mentioned at
https://github.com/ooni/probe-cli/pull/715#issuecomment-1119450484
* chore(netx): show that test was already broken
We didn't see the breakage before because we were not using
the created transport, but the issue of using a nil dialer was
already present before, we just didn't see it.
Now we understand why removing the http3transport in
c62244c620cee5fadcc2ca89d8228c8db0b96add did cause the
breakage mentioned at
https://github.com/ooni/probe-cli/pull/715#issuecomment-1119450484
* fix(netx): convert broken integration test to working unit test
There's no point in using the network here. Add a fake dialer that
breaks and ensure we're getting the expected error.
We've now improved upon the original test because the original test was
not doing anything while now we're testing whether we get back a QUIC
dialer that _can be used_.
After this commit, I can then readd the cleanup commit
c62244c620cee5fadcc2ca89d8228c8db0b96add and it won't be
broken anymore (at least, this is what I expected to happen).
* Revert "Revert "cleanup(netxlite): http3dialer can be removed""
This reverts commit 0e254bfc6ba3bfd65365ce3d8de2c8ec51b925ff
because now we should have fixed the broken test.
Co-authored-by: decfox <decfox>
Co-authored-by: Simone Basso <bassosimone@gmail.com>
Here's the squash of the following patches that enable support
for go1.18 and update our dependencies.
This diff WILL need to be backported to the release/3.14 branch.
* chore: use go1.17.8
See https://github.com/ooni/probe/issues/2067
* chore: upgrade to probe-assets@v0.8.0
See https://github.com/ooni/probe/issues/2067.
* chore: update dependencies and enable go1.18
As mentioned in 7a0d17ea91,
the tree won't build with `go1.18` unless we say it does.
So, not only here we need to update dependencies but also we
need to explicitly say `go1.18` in the `go.mod`.
This work is part of https://github.com/ooni/probe/issues/2067.
* chore(coverage.yml): run with go1.18
This change will give us a bare minimum confidence that we're
going to build our tree using version 1.18 of golang.
See https://github.com/ooni/probe/issues/2067.
* chore: update user agent used for measuring
See https://github.com/ooni/probe/issues/2067
* chore: run `go generate ./...`
See https://github.com/ooni/probe/issues/2067
* fix(dialer_test.go): make test work with go1.17 and go1.18
1. the original test wanted the dial to fail, so ensure we're not
passing any domain name to exercise dialing not resolving;
2. match the end of the error rather than the whole error string.
Tested locally with both go1.17 and go1.18.
See https://github.com/ooni/probe-cli/pull/708#issuecomment-1096447186
This change should prevent old clients (e.g., Android 6) from
failing to perform a ndt7 experiment because their internal CA
bundle is now too old.
Reference issue: https://github.com/ooni/probe/issues/2031
While there, run `go mod tidy` to fix a minor inconsistence in
the current `go.mod` file.
This diff WILL require a backport to release/3.14.
I have experimented with a new approach for embedding psiphon in
7fc0bcd97c.
It seems the build is still building and the experiment is still
running. With the new approach, we're now vendoring less dependencies,
which hopefully puts us in the right track to, one day, import
Psiphon as a normal Go dependency.
I'll make sure to report to the Psiphon team what is currently
preventing us from importing their ClientLibrary directly.
This work is part of https://github.com/ooni/probe/issues/1894.
As part of running the update, I run `go get -u -v ./...`, which
led to go-cmp also being updated in the process.
This diff contains the following changes and enhancements:
1. upgrade snowflake to v2
2. observe that we were not changing defaults from outside of snowflake.go, so remove code allowing to do that;
3. bump the timeout to 600 seconds (it seems 300 was not always enough based on my testing);
4. add useful knob to disable `torsf` progress (it's really annoying on console, we should do something about this);
5. ptx.go: avoid printing an error when the connection has just been closed;
6. snowflake: test AMP cache, see that it's not working currently, so leave it disabled.
Related issues: https://github.com/ooni/probe/issues/1845, https://github.com/ooni/probe/issues/1894, and https://github.com/ooni/probe/issues/1917.
This diff updates all the dependencies using the aforementioned
go command. What remains to be done is to check whether any
dependency that we're using has bumped their major verson number,
and I'll do that in a subsequent pull request.
Reference issue: https://github.com/ooni/probe/issues/1894.
We're starting to prepare a new release. The first step is to use
go1.17.6 in the following places:
1. everywhere we define the version of Go in this tree;
2. when we're building for Android (using ooni/go);
3. in our ooni/oohttp fork of Go net/http standard library.
Reference issue: https://github.com/ooni/probe/issues/1845
This branch adds support for running:
1. `go-libtor` on mobile.
2. the tor provided by the desktop app via the `OONI_TOR_BINARY` environment variable.
See https://github.com/ooni/ooni.org/issues/761.
Co-authored-by: Simone Basso <bassosimone@gmail.com>
This diff forwardports 856e436e20d511a4f0d618546da7921fa9f8c5f6 to the master branch
Original commit message:
- - -
This pull request changes `mk` and github workflows to build and publish binaries on tag. We also update the documentation to explain this new branching model. Basically, we have release branches where we produce binary packages and we add extra code, on tag, to publish such packages inside a release.
We discussed removing most secrets from builds in this repository and having a different tool/repository that takes in input also secrets for doing follow-up actions after publishing. As a consequence, this pull request also removes all pieces of code that require secrets. The next step is to reinstate this code in this new repository/tool.
The existing code in `mk` also implemented caching. This feature was useful when doing local builds because it reduced the time required to obtain binary releases. With builds running as part of GitHub actions, we don't need caching because we spawn parallel machines to build binaries. Therefore, let us also remove caching, which makes the code simpler. (Caching in itself is hard and in https://github.com/ooni/probe/issues/1875 I noted that, for example, caching of the `ooni/go` repository was leading to some unwanted behaviour when changing the branch. Without caching, this behaviour is gone and we always generally use fresh information to produce builds.) Of course, this means that local builds are now slower, but I do not think this is a problem _because_ we want to use GitHub actions for building in the common case.
Reference issues: https://github.com/ooni/probe/issues/1879 and https://github.com/ooni/probe/issues/1875.
The final aspect to mention to conclude this description is an implementation one:
```
gh release create -p $tag --target $GITHUB_SHA || true
```
The code above uses `|| true` because there could already be a release. So, basically, it means that, if a release does not already exist, then we're going to create one. Otherwise, it does not matter because there's already a release.
This diff forward ports f47b0c6c16e0cd417e3591358eb85b45962f307d to master.
Original commit message:
- - -
1. we now need to name the framework `.xcframework` otherwise
gomobile refuses to build a new framework for us ¯\_(ツ)_/¯
2. remove duplicate errno definition for iOS (iOS and darwin
are considered the same, therefore we don't need iOS defs)
Reference issue for this PR: https://github.com/ooni/probe/issues/1876
This diff WILL need to be forwardported to master.
This diff forward ports adcb0f9ae3b9e074c301d4f7f0e8f2d0ef6466b9.
Original commit message:
- - -
- ensure we use go1.17.3 in workflows
- update to a version of ooni/oohttp that uses go1.17.3
This change WILL need to be forward ported to master.
Closes https://github.com/ooni/probe/issues/1861
I discovered which transport were used by apitool and made sure he gets the same transports now. While there, I discovered an issue with ooni/oohttp that has been fixed with cba9b1ce5e.
Part of https://github.com/ooni/probe/issues/1591
This diff enables `websteps` to use uTLS for TLS parroting. It integrates the `oohttp.StdlibTransport` wrapper which uses the `ooni/oohttp` fork. `oohttp` supports TLS-like connections like `utls.Conn`.
As a prototype, the testhelper and `websteps` code now uses the `utls.HelloChrome_Auto` fingerprint, i.e. the simulated TLS fingerprint of the Google Chrome browser.
It is a further contribution for my GSoC project.
Reference issue: https://github.com/ooni/probe/issues/1733
* feat: introduce ptx package for pluggable transports dialers
Version 2 of the pluggable transports specification defines a function
that's like `Dial() (net.Conn, error`).
Because we use contexts as much as possible in `probe-cli`, we are
wrapping such an interface into a `DialContext` func.
The code for obfs4 is adapted from https://github.com/ooni/probe-cli/pull/341.
The code for snowflake is significantly easier than it is in
https://github.com/ooni/probe-cli/pull/341, because now Snowflake
supports the PTv2 spec (thanks @cohosh!).
The code for setting up a pluggable transport listener has also
been adapted from https://github.com/ooni/probe-cli/pull/341.
We cannot merge this code yet, because we need unit testing, yet the
newly added code already seems suitable for these use cases:
1. testing by dialing and seeing whether we can dial (which is not
very useful but still better than not doing it);
2. spawning tor+pluggable transports for circumvention (we need a
little more hammering like we did in https://github.com/ooni/probe-cli/pull/341,
which is basically https://github.com/ooni/probe/issues/1565, and then
we will be able to do that, as demonstrated by the new, simple client which
already allows us to use pluggable transports with tor);
3. testing by launching tor (when available) with a set of
pluggable transports (which depends on https://github.com/ooni/probe-engine/issues/897
and has not been assigned an issue yet).
* fix: tweaks after self code-review
* feat: write quick tests for ptx/obfs4
(They run in 0.4s, so I think it's fine for them to always run.)
* feat(ptx/snowflake): write unit and integration tests
* feat: create a fake PTDialer
The idea is that we'll use this simpler PTDialer for testing.
* feat: finish writing tests for new package
* Apply suggestions from code review
* Update internal/ptx/dependencies_test.go
Co-authored-by: Arturo Filastò <arturo@openobservatory.org>
* Update internal/ptx/dependencies_test.go
Co-authored-by: Arturo Filastò <arturo@openobservatory.org>
* chore: use as testing bridge one that's used by tor browser
The previous testing bridge used to be used by tor browser but
it was subsequently removed here:
e26e91bef8
See https://github.com/ooni/probe-cli/pull/373#discussion_r649820724
Co-authored-by: Arturo Filastò <arturo@openobservatory.org>
This functionality should be helpful to test that the general
interface of the tunnel package is okay from the engine package.
Part of https://github.com/ooni/probe/issues/985
We use an optional build tag to hide this configuration. When you
choose this configuration, you need to provide the encrypted config
as well as the corresponding decryption key.
This is not the final design. This is an interim design to start
working and experimenting with this functionality. The general
idea here is to support psiphon in the binaries we build without
committing the psiphon config to the repository itself.
Part of https://github.com/ooni/probe/issues/985
* fix(pkg.go.dev): import a subpackage containing the assets
We're trying to fix this issue that pkg.go.dev does not build.
Thanks to @hellais for this very neat idea! Let's keep our
fingers crossed and see whether it fixes!
* feat: use embedded geoip databases
Closes https://github.com/ooni/probe/issues/1372.
Work done as part of https://github.com/ooni/probe/issues/1369.
* fix(assetsx): add tests
* feat: simplify and just vendor uncompressed DBs
* remove tests that seems not necessary anymore
* fix: run go mod tidy
* Address https://github.com/ooni/probe-cli/pull/260/files#r605181364
* rewrite a test in a better way
* fix: gently cleanup the legacy assetsdir
Do not remove the whole directory with brute force. Just zap the
files whose name we know. Then attempt to delete the legacy directory
as well. If not empty, just fail. This is fine because it means the
user has stored other files inside the directory.
* fix: create .miniooni if missing
* internal/engine/ooapi: auto-generated API client
* feat: introduce the callers abstraction
* feat: implement API caching on disk
* feat: implement cloneWithToken when we require login
* feat: implement login
* fix: do not cache all APIs
* feat: start making space for more tests
* feat: implement caching policy
* feat: write tests for caching layer
* feat: add integration tests and fix some minor issues
* feat: write much more unit tests
* feat: add some more easy unit tests
* feat: add tests that use a local server
While there, make sure many fields we care about are OK.
* doc: write basic documentation
* fix: tweak sentence
* doc: improve ooapi documentation
* doc(ooapi): other documentation improvements
* fix(ooapi): remove caching for most APIs
We discussed this topic yesterday with @FedericoCeratto. The only
place where we want LRU caching is MeasurementMeta.
* feat(ooapi): improve handling of errors during login
This was also discussed yesterday with @FedericoCeratto
* fix(swaggerdiff_test.go): temporarily disable
Before I work on this, I need to tend onto other tasks.
* fix(ootest): add one more test case
We're going towards 100% coverage of this package, as it ought to be.
* feat(ooapi): test cases for when the probe clock is off
* fix(ooapi): change test to have 100% unittest coverage
* feat: sync server and client APIs definition
Companion PR: https://github.com/ooni/api/pull/218
* fix(ooapi): start testing again against API
* fix(ooapi): only generate each file once
* chore: set version to 3.7.0-alpha
While there, make sure we don't always skip a currently failing
riseupvpn test, and slightly clarify the readme.
* fix(kvstore): less scoped error message
* chore: update dependencies
* chore: update user agent for measurements
* chore: we're now at v3.6.0
* chore: update assets
* chore: update bundled CA
* fix: address some goreportcard.com warnings
* fix(debian/changelog): zap release that breaks out build scripts
We're forcing the content of changelog with `dch`, so it's fine to
not have any specific new release in there.
* fix: make sure tests are passing locally
Notably, I removed a chunk of code where we were checking for network
activity. Now we don't fetch the databases and it's not important. Before,
it was important because the databases are ~large.
* fix: temporarily comment out riseupvn integration tests
See https://github.com/ooni/probe/issues/1354 for work aimed at
reducing the rate of false positives (thanks @cyBerta!)
* feat: use go1.16 embedding for resources
We want to embed everything that can be easily embedded. We should, at a
minimum, replace the downloading of resources and bindata.
Ref: https://github.com/ooni/probe/issues/1367.
* fix: get rid of bindata and use go embed instead
* fix: start unbreaking some automatic tests
* fix: fetch resources as part of the mobile build
* fix: convert more stuff to go1.16
I still expect many breakages, but we'll fix them.
* fix: make the windows CI green
* fix: get resources before running QA
* fix: go1.16 uses modules by default
* hopefully fix all other outstanding issues
* fix(QA/telegram.py): add another DC IP address
* Apply suggestions from code review
This is how I did it:
1. `git clone https://github.com/ooni/probe-engine internal/engine`
2. ```
(cd internal/engine && git describe --tags)
v0.23.0
```
3. `nvim go.mod` (merging `go.mod` with `internal/engine/go.mod`
4. `rm -rf internal/.git internal/engine/go.{mod,sum}`
5. `git add internal/engine`
6. `find . -type f -name \*.go -exec sed -i 's@/ooni/probe-engine@/ooni/probe-cli/v3/internal/engine@g' {} \;`
7. `go build ./...` (passes)
8. `go test -race ./...` (temporary failure on RiseupVPN)
9. `go mod tidy`
10. this commit message
Once this piece of work is done, we can build a new version of `ooniprobe` that
is using `internal/engine` directly. We need to do more work to ensure all the
other functionality in `probe-engine` (e.g. making mobile packages) are still WAI.
Part of https://github.com/ooni/probe/issues/1335
* feat: sketch out periodic command
* feat: sketch out periodic command for macOS
* feat: implement darwin's launch agent
* refactor: better way to run on darwin
Make sure we have code that builds on all platforms.
* fix(run): max 10 URLs with darwin in unattended mode
* feat: add support for seeing/streaming logs
* feat: implement the status command and add usage hints
* feat(periodic): run onboarding if needed
* fix: no too confusing function names
* fix: s/periodic/autorun/
Discussed earlier this morning with @hellais.
* fix: we cannot show logs before Big Sur
Bug reported by @hellais.
The CloseReport method is gone. We don't need to close reports
anymore with the new OONI backend.
The InputsRequired flags now is InputsOrQueryTestLists.
This diff pins to ooni/probe-engine@3049779878
and starts using the recently introduced probe-engine APIs.
Namely, here, we use the InputLoader for loading URLs.
I've confirmed manually everything is still working as intended.
Part of https://github.com/ooni/probe/issues/1283.
(In particular, the InputLoader is the abstraction allowing us to load
input from several sources, including command line flags and external
files.)
* feat: use ooni/probe-engine@286613b74e and cleanup
1. zap unused configuration settings from the config file but do not
bump the version number because doing that _may_ interact in unexpected
ways with probe-desktop (hence https://github.com/ooni/probe/issues/1297)
and also because we've just _removed_ stuff for now, therefore any
previous configuration file will continue to work, except that we'll
be ignoring a bunch of options. In a future version of probe-cli I'll
spend some time to further improve config file management.
2. accordingly, make sure all current configuration files that are around
in the tree are current and only feature supported options.
3. update to ooni/probe-engine@286613b74e, which contains a bunch of
APIs that should allow us to simplify the interaction between the cli and
the engine, by sharing code more cleverly.
4. zap GetTestKeys because now we use code in probe-engine instead.
5. zap LogSummary because it was not being used.
6. the main change related to cleaning up the config and to the update
to the latest probe-engine is that include_{cc,asn,ip} settings are
gone and we now share the CC and the ASN and we never share the IP addr.
Reference issue: https://github.com/ooni/probe/issues/1283.
After this change is landed, there's a bunch more work to do to further
unify cli and engine. The final state will be that the cli uses ~the code
used by miniooni, so it will have a bunch of desirable options.
* fix: bindata after recent changes
* chore: set version to 3.0.12-alpha
I need to bless 3.0.11 now to pin to ooni/probe-engine v0.20.2.
* chore: update all dependencies
Most notably, pin to ooni/probe-engine 0.20.2.
This beta release incorporates recent fixes in ooni/probe-engine that we
would like to test and ship relatively soon.
I'm doing this as part of https://github.com/ooni/explorer/issues/495
