This diff modifies the construction of a dialer to allow one
to insert custom dialer wrappers into the dialers chain.
The point of the chain in which we allow custom wrappers is the
optimal one for connect, read, and write measurements.
This new design is better than the previous netx design since
we don't need to construct the whole chain manually now.
The work in this diff is part of the effort to make engine/netx
just a tiny wrapper around netxlite.
See https://github.com/ooni/probe/issues/2121.
After https://github.com/ooni/probe-cli/pull/764, the build for
CGO_ENABLED=0 has been broken for miniooni:
https://github.com/ooni/probe-cli/runs/6636995859?check_suite_focus=true
Likewise, it's not possible to run tests with CGO_ENABLED=0.
To make tests work with `CGO_ENABLED=0`, I needed to sacrifice some
unit tests run for the CGO case. It is not fully clear to me what was happening
here, but basically `getaddrinfo_cgo_test.go` was compiled with CGO
being disabled, even though the ``//go:build cgo` flag was specified.
Additionally, @hellais previously raised a valid point in the review
of https://github.com/ooni/probe-cli/pull/698:
> Another issue we should consider is that, if I understand how
> this works correctly, depending on whether or not we have built
> with CGO_ENABLED=0 on or not, we are going to be measuring
> things in a different way (using our cgo inspired getaddrinfo
> implementation or using netgo). This might present issues when
> analyzing or interpreting the data.
>
> Do we perhaps want to add some field to the output data format that
> gives us an indication of which DNS resolution code was used to
> generate the the metric?
This comment is relevant to the current commit because
https://github.com/ooni/probe-cli/pull/698 is the previous
iteration of https://github.com/ooni/probe-cli/pull/764.
So, while fixing the build and test issues, let us also distinguish
between the CGO_ENABLED=1 and CGO_ENABLED=0 cases.
Before this commit, OONI used "system" to indicate the case where
we were using net.DefaultResolver. This behavior dates back to the
Measurement Kit days. While it is true that ooni/probe-engine and
ooni/probe-cli could have been using netgo in the past when we
said "system" as the resolver, it also seems reasonable to continue
to use "system" top indicate getaddrinfo.
So, the choice here is basically to use "netgo" from now on to
indicate the cases in which we were built with CGO_ENABLED=0.
This change will need to be documented into ooni/spec along with
the introduction of the `android_dns_cache_no_data` error.
## Checklist
- [x] I have read the [contribution guidelines](https://github.com/ooni/probe-cli/blob/master/CONTRIBUTING.md)
- [x] reference issue for this pull request: https://github.com/ooni/probe/issues/2029
- [x] if you changed anything related how experiments work and you need to reflect these changes in the ooni/spec repository, please link to the related ooni/spec pull request: https://github.com/ooni/spec/pull/242
This diff has been extracted and adapted from 8848c8c516
The reason to prefer composition over embedding is that we want the
build to break if we add new methods to interfaces we define. If the build
does not break, we may forget about wrapping methods we should
actually be wrapping. I noticed this issue inside netxlite when I was working
on websteps-illustrated and I added support for NS and PTR queries.
See https://github.com/ooni/probe/issues/2096
While there, perform comprehensive netxlite code review
and apply minor changes and improve the docs.
This diff fixes the short-circuit-IP-addr resolver to
correctly handle IP addrs during LookupHTTPS.
The original diff was: 2b51d144bf
See https://github.com/ooni/probe/issues/2096
While there, add unit tests for IPv6.
This diff implements the first two cleanups defined at https://github.com/ooni/probe/issues/1956:
> - [ ] observe that `netxlite` and `netx` differ in error wrapping only in the way in which we set `ErrWrapper.Operation`. Observe that the code using `netxlite` does not care about such a field. Therefore, we can modify `netxlite` to set such a field using the code of `netx` and we can remove `netx` specific code for errors (which currently lives inside of the `./internal/engine/legacy/errorsx` package
>
> - [ ] after we've done the previous cleanup, we can make all the classifiers code private, since there's no code outside `netxlite` that needs them
A subsequent diff will address the remaining cleanup.
While there, notice that there are failing, unrelated obfs4 tests, so disable them in short mode. (I am confident these tests are unrelated because they fail for me when running test locally from the `master` branch.)
## Checklist
- [x] I have read the [contribution guidelines](https://github.com/ooni/probe-cli/blob/master/CONTRIBUTING.md)
- [x] reference issue for this pull request: https://github.com/ooni/probe/issues/1885
- [x] related ooni/spec pull request: N/A
Location of the issue tracker: https://github.com/ooni/probe
## Description
This PR contains a set of changes to move important interfaces and data types into the `./internal/model` package.
The criteria for including an interface or data type in here is roughly that the type should be important and used by several packages. We are especially interested to move more interfaces here to increase modularity.
An additional side effect is that, by reading this package, one should be able to understand more quickly how different parts of the codebase interact with each other.
This is what I want to move in `internal/model`:
- [x] most important interfaces from `internal/netxlite`
- [x] everything that was previously part of `internal/engine/model`
- [x] mocks from `internal/netxlite/mocks` should also be moved in here as a subpackage
When preparing a tutorial for netxlite, I figured it is easier
to tell people "hey, this is the package you should use for all
low-level networking stuff" rather than introducing people to
a set of packages working together where some piece of functionality
is here and some other piece is there.
Part of https://github.com/ooni/probe/issues/1591
I discovered which transport were used by apitool and made sure he gets the same transports now. While there, I discovered an issue with ooni/oohttp that has been fixed with cba9b1ce5e.
Part of https://github.com/ooni/probe/issues/1591
* netxlite: improve docs, tests, and code quality
* better documentation
* more strict testing of dialer (especially make sure we
document the quirk in https://github.com/ooni/probe/issues/1779
and we have tests to guarantee we don't screw up here)
* introduce NewErrWrapper factory for creating errors so we
have confidence we are creating them correctly
Part of https://github.com/ooni/probe/issues/1591
* fix(netxlite): make default resolver converge faster
Closes https://github.com/ooni/probe/issues/1726
* Update internal/netxlite/resolver.go
* fix(ndt7): adapt tests after previous change
Because now we're running the DNS resolution inside a goroutine
with a child context, the returned error string is different.
The previous error said we canceled the whole dialing operation,
while now we see directly that the context was canceled.
We would like to refactor the code so that a DoH resolver owns the
connections of its underlying HTTP client.
To do that, we need first to incorporate CloseIdleConnections
into the Resolver model. Then, we need to add the same function
to all netxlite types that wrap a Resolver type.
At the same time, we want the rest of the code for now to continue
with the simpler definition of a Resolver, now called ResolverLegacy.
We will eventually propagate this change to the rest of the tree
and simplify the way in which we manage Resolvers.
To make this possible, we introduce a new factory function that
adapts a ResolverLegacy to become a Resolver.
See https://github.com/ooni/probe/issues/1591.
## Description
This PR continues the refactoring of `netx` under the following principles:
1. do not break the rest of the tree and do not engage in extensive tree-wide refactoring yet
2. move under `netxlite` clearly related subpackages (e.g., `iox`, `netxmocks`)
3. move into `internal/netxlite/internal` stuff that is clearly private of `netxlite`
4. hide implementation details in `netxlite` pending new factories
5. refactor `tls` code in `netxlite` to clearly separate `crypto/tls` code from `utls` code
After each commit, I run `go test -short -race ./...` locally. Each individual commit explains what it does. I will squash, but this operation will preserve the original commit titles, so this will give further insight on each step.
## Commits
* refactor: rename netxmocks -> netxlite/mocks
Part of https://github.com/ooni/probe/issues/1591
* refactor: rename quicx -> netxlite/quicx
See https://github.com/ooni/probe/issues/1591
* refactor: rename iox -> netxlite/iox
Regenerate sources and make sure the tests pass.
See https://github.com/ooni/probe/issues/1591.
* refactor(iox): move MockableReader to netxlite/mocks
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): generator is an implementation detail
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): separate tls and utls code
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): hide most types but keep old names as legacy
With this change we avoid breaking the rest of the tree, but we start
hiding some implementation details a bit. Factories will follow.
See https://github.com/ooni/probe/issues/1591
This is the extension of https://github.com/ooni/probe-cli/pull/431, and my final deliverable for GSoC 2021.
The diff introduces:
1) The new `testhelper` which supports testing multiple IP endpoints per domain and introduces HTTP/3 control measurements. The specification of the `testhelper` can be found at https://github.com/ooni/spec/pull/219. The `testhelper` algorithm consists of three main steps:
* `InitialChecks` verifies that the input URL can be parsed, has an expected scheme, and contains a valid domain name.
* `Explore` enumerates all the URLs that it discovers by redirection from the original URL, or by detecting h3 support at the target host.
* `Generate` performs a step-by-step measurement of each discovered URL.
2) A prototype of the corresponding new experiment `websteps` which uses the control measurement of the `testhelper` to know which URLs to measure, and what to expect. The prototype does not yet have:
* unit and integration tests,
* an analysis tool to compare the control and the probe measurement.
This PR is my final deliverable as it is the outcome of the trials, considerations and efforts of my GSoC weeks at OONI.
It fully integrates HTTP/3 (QUIC) support which has been only used in the `urlgetter` experiment until now.
Related issues: https://github.com/ooni/probe/issues/1729 and https://github.com/ooni/probe/issues/1733.
* refactor(netxlite): make sure we always use netmocks
While there, improve logging and make sure we test 100% of the
package with unit tests only. (We don't need to have integration
testing in this package because it's fairly simple/obvious.)
Part of https://github.com/ooni/probe/issues/1505
* further improve logs
What do I mean by pivoting? Netx is currently organized by row:
```
| dialer | quicdialer | resolver | ...
saving | | | | ...
errorwrapping | | | | ...
logging | | | | ...
mocking/sys | | | | ...
```
Every row needs to implement saving, errorwrapping, logging, mocking (or
adapting to the system or to some underlying library).
This causes cross package dependencies and, in turn, complexity. For
example, we need the `trace` package for supporting saving.
And `dialer`, `quickdialer`, et al. need to depend on such a package.
The same goes for errorwrapping.
This arrangement further complicates testing. For example, I am
currently working on https://github.com/ooni/probe/issues/1505 and
I realize it need to repeat integration tests in multiple places.
Let's say instead we pivot the above matrix as follows:
```
| saving | errorwrapping | logging | ...
dialer | | | | ...
quicdialer | | | | ...
logging | | | | ...
mocking/sys | | | | ...
...
```
In this way, now every row contains everything related to a specific
action to perform. We can now share code without relying on extra
support packages. What's more, we can write tests and, judding from
the way in which things are made, it seems we only need integration
testing in `errorwrapping` because it's where data quality matters
whereas, in all other cases, unit testing is fine.
I am going, therefore, to proceed with these changes and "pivot"
`netx`. Hopefully, it won't be too painful.
