The main issue I see inside tracex at the moment is that we
construct the HTTP measurement from separate events.
This is fragile because we cannot be sure that these events
belong to the same round trip. (Currently, they _are_ part
of the same round trip, but this is a fragile assumption and
it would be much more robust to dispose of it.)
To prepare for emitting a single event, it's imperative to
have two distinct fields for HTTP request and response headers,
which is the main contribution in this commit.
Then, we have a bunch of smaller changes including:
1. correctly naming 'response' the DNS response (instead of 'reply')
2. ensure we always use pointer receivers
Reference issue: https://github.com/ooni/probe/issues/2121
Acknowledge that transports MAY be used in isolation (i.e., outside
of a Resolver) and add support for wrapping.
Ensure that every factory that creates an unwrapped type is named
accordingly to hopefully ensure there are no surprises.
Implement DNSTransport wrapping and use a technique similar to the
one used by Dialer to customize the DNSTransport while constructing
more complex data types (e.g., a specific resolver).
Ensure that the stdlib resolver's own "getaddrinfo" transport (1)
is wrapped and (2) could be extended during construction.
This work is part of my ongoing effort to bring to this repository
websteps-illustrated changes relative to netxlite.
Ref issue: https://github.com/ooni/probe/issues/2096
This diff modifies the system resolver to use a getaddrinf transport.
Obviously the transport is a fake, but its existence will allow us
to observe DNS events more naturally.
A lookup using the system resolver would be a ANY lookup that will
contain all the resolved IP addresses into the same response.
This change was also part of websteps-illustrated, albeit the way in
which I did it there was less clean than what we have here.
Ref issue: https://github.com/ooni/probe/issues/2096
Rather than passing functions to construct complex objects such
as Dialer and QUICDialer, pass interface implementations.
Ensure that a nil implementation does not cause harm.
Make Saver implement the correct interface either directly or
indirectly. We need to implement the correct interface indirectly
for TCP conns (or connected UDP sockets) because we have two
distinct use cases inside netx: observing just the connect event
and observing just the I/O events.
With this change, the construction of composed Dialers and
QUICDialers is greatly simplified and more obvious.
Part of https://github.com/ooni/probe/issues/2121
The code that is now into the tracex package was written a long
time ago, so let's start to make it more in line with the coding
style of packages that were written more recently.
I didn't apply all the changes I'd like to apply in a single diff
and for now I am committing just this diff.
Broadly, what we need to do is:
1. improve documentation
2. ~always use pointer receivers (object receives have the issue
that they are not mutable by accident meaning that you can mutate
them but their state do not change after the call returns, which
is potentially a source of bugs in case you later refactor to use
a pointer receiver, so always use pointer receivers)
3. ~always avoid embedding (let's say we want to avoid embedding
for types we define and it's instead fine to embed types that are
defined in the stdlib: if later we add a new method, we will not
see a broken build and we'll probably forget to add the new method
to all wrappers -- conversely, if we're wrapping rather than
embedding, we'll see a broken build and act accordingly)
4. prefer unit tests and group tests by type being tested rather
than using a flat structure for tests
There's a coverage slippage that I'll compensate in a follow-up diff where I'll focus on unit testing.
Reference issue: https://github.com/ooni/probe/issues/2121
This diff creates a new package under netx called tracex that
contains everything we need to perform measurements using events
tracing and postprocessing (which is the technique with which
we implement most network experiments).
The general idea here is to (1) create a unique package out of
all of these packages; (2) clean up the code a bit (improve tests,
docs, apply more recent code patterns); (3) move the resulting
code as a toplevel package inside of internal.
Once this is done, netx can be further refactored to avoid
subpackages and we can search for more code to salvage/refactor.
See https://github.com/ooni/probe/issues/2121
This diff replaces engine/netx code with netxlite code in
the engine/session.go file. To this end, we needed to move
some code from engine/netx to netxlite. While there, we
did review and improve the unit tests.
A notable change in this diff is (or seems to be) that in
engine/session.go we're not filtering for bogons anymore so
that, in principle, we could believe a resolver returning
to us bogon IP addresses for OONI services. However, I did
not bother with changing bogons filtering because the
sessionresolver package is already filtering for bogons,
so it is actually okay to avoid doing that again the
session.go code. See:
https://github.com/ooni/probe-cli/blob/v3.15.0-alpha.1/internal/engine/internal/sessionresolver/resolvermaker.go#L88
There are two reference issues for this cleanup:
1. https://github.com/ooni/probe/issues/2115
2. https://github.com/ooni/probe/issues/2121
This diff refactors the DNSTransport model to receive in input a DNSQuery and return in output a DNSResponse.
The design of DNSQuery and DNSResponse takes into account the use case of a transport using getaddrinfo, meaning that we don't need to serialize and deserialize messages when using getaddrinfo.
The current codebase does not use a getaddrinfo transport, but I wrote one such a transport in the Websteps Winter 2021 prototype (https://github.com/bassosimone/websteps-illustrated/).
The design conversation that lead to producing this diff is https://github.com/ooni/probe/issues/2099
This diff forward ports b6db4f64dc83a2a27ee3ce6bba5ac93db922832d, whose
original log message is the following:
- - -
We're now using ooni/oohttp as our HTTP library in most cases.
A limitation of this library is that net/http/httptrace does not
work very well and reliably because (1) we need to use oohttp's
version of that code and (2) we cannot observe net events.
I noticed this fact because an integration test for collecting
HTTP performance metrics was broken.
The best solution here is to remove this functionality, since
it was basically unused in the repository. Only some integration
tests inside urlgetter bothered with these metrics.
A more clinical fix would have been to use ooni/oohttp/httptrace
instead of net/http/httptrace in the stdlib, but it does not
seem to be a good idea, given that those metrics were not used.
With this diff applied, we'll further reduce the number of locally
failing integration tests to just jafar-specific tests.
This diff WILL need to be forwardported to `master`.
This diff introduces a new package called `./internal/archival`. This package collects data from `./internal/model` network interfaces (e.g., `Dialer`, `QUICDialer`, `HTTPTransport`), saves such data into an internal tabular data format suitable for on-line processing and analysis, and allows exporting data into the OONI data format.
The code for collecting and the internal tabular data formats are adapted from `measurex`. The code for formatting and exporting OONI data-format-compliant structures is adapted from `netx/archival`.
My original objective was to _also_ (1) fully replace `netx/archival` with this package and (2) adapt `measurex` to use this package rather than its own code. Both operations seem easily feasible because: (a) this code is `measurex` code without extensions that are `measurex` related, which will need to be added back as part of the process; (b) the API provided by this code allows for trivially converting from using `netx/archival` to using this code.
Yet, both changes should not be taken lightly. After implementing them, there's need to spend some time doing QA and ensuring all nettests work as intended. However, I am planning a release in the next two weeks, and this QA task is likely going to defer the release. For this reason, I have chosen to commit the work done so far into the tree and defer the second part of this refactoring for a later moment in time. (This explains why the title mentions "1/N").
On a more high-level perspective, it would also be beneficial, I guess, to explain _why_ I am doing these changes. There are two intertwined reasons. The first reason is that `netx/archival` has shortcomings deriving from its original https://github.com/ooni/netx legacy. The most relevant shortcoming is that it saves all kind of data into the same tabular structure named `Event`. This design choice is unfortunate because it does not allow one to apply data-type specific logic when processing the results. In turn, this choice results in complex processing code. Therefore, I believe that replacing the code with event-specific data structures is clearly an improvement in terms of code maintainability and would quite likely lead us to more confidently change and evolve the codebase.
The second reason why I would like to move forward these changes is to unify the codepaths used for measuring. At this point in time, we basically have two codepaths: `./internal/engine/netx` and `./internal/measurex`. They both have pros and cons and I don't think we want to rewrite whole experiments using `netx`. Rather, what we probably want is to gradually merge these two codepaths such that `netx` is a set of abstractions on top of `measurex` (which is more low-level and has a more-easily-testable design). Because saving events and generating an archival data format out of them consists of at least 50% of the complexity of both `netx` and `measurex`, it seems reasonable to unify this archival-related part of the two codebases as the first step.
At the highest level of abstraction, these changes are part of the train of changes which will eventually lead us to bless `websteps` as a first class citizen in OONI land. Because `websteps` requires different underlying primitives, I chose to develop these primitives from scratch rather than wrestling with `netx`, which used another model. The model used by `websteps` is that we perform each operation in isolation and immediately we save the results, while `netx` creates whole data structures and collects all the events happening via tracing. We believe the model used by `websteps` to be better because it does not require your code to figure out everything that happened after the measurement, which is a source of subtle bugs in the current implementation. So, when I started implementing websteps I extracted the bits of `netx` that could also be beneficial to `websteps` into a separate library, thus `netxlite` was born.
The reference issue describing merging the archival of `netx` and `measurex` is https://github.com/ooni/probe/issues/1957. As of this writing the issue still references the original plan, which I could not complete by the end of this Sprint, so I am going to adapt the text of the issue to only refer to what was done in here next. Of course, I also need follow-up issues.
The DNSClient type existed because the Resolver type did not
include CloseIdleConnections in its signature.
Now that Resolver includes CloseIdleConnections, the DNSClient
type has become unnecessary and can be safely removed.
See https://github.com/ooni/probe/issues/1956.
This diff addresses two items of https://github.com/ooni/probe/issues/1956:
> - [ ] we can remove legacy names from `./internal/engine/netx/resolver/legacy.go`
>
> - [ ] we can remove `DialTLSContext` from `./internal/engine/netx/resolver/tls_test.go`
More cleanups may follow.
This diff addresses another point of https://github.com/ooni/probe/issues/1956:
> - [ ] observe that we're still using a bunch of private interfaces for common interfaces such as the `Dialer`, so we can get rid of these private interfaces and always use the ones in `model`, which allows us to remove a bunch of legacy wrappers
Additional cleanups may still be possible. The more I cleanup, the more I see
there's extra legacy code we can dispose of (which seems good?).
This diff implements the first two cleanups defined at https://github.com/ooni/probe/issues/1956:
> - [ ] observe that `netxlite` and `netx` differ in error wrapping only in the way in which we set `ErrWrapper.Operation`. Observe that the code using `netxlite` does not care about such a field. Therefore, we can modify `netxlite` to set such a field using the code of `netx` and we can remove `netx` specific code for errors (which currently lives inside of the `./internal/engine/legacy/errorsx` package
>
> - [ ] after we've done the previous cleanup, we can make all the classifiers code private, since there's no code outside `netxlite` that needs them
A subsequent diff will address the remaining cleanup.
While there, notice that there are failing, unrelated obfs4 tests, so disable them in short mode. (I am confident these tests are unrelated because they fail for me when running test locally from the `master` branch.)
## Checklist
- [x] I have read the [contribution guidelines](https://github.com/ooni/probe-cli/blob/master/CONTRIBUTING.md)
- [x] reference issue for this pull request: https://github.com/ooni/probe/issues/1885
- [x] related ooni/spec pull request: N/A
Location of the issue tracker: https://github.com/ooni/probe
## Description
This PR contains a set of changes to move important interfaces and data types into the `./internal/model` package.
The criteria for including an interface or data type in here is roughly that the type should be important and used by several packages. We are especially interested to move more interfaces here to increase modularity.
An additional side effect is that, by reading this package, one should be able to understand more quickly how different parts of the codebase interact with each other.
This is what I want to move in `internal/model`:
- [x] most important interfaces from `internal/netxlite`
- [x] everything that was previously part of `internal/engine/model`
- [x] mocks from `internal/netxlite/mocks` should also be moved in here as a subpackage
When preparing a tutorial for netxlite, I figured it is easier
to tell people "hey, this is the package you should use for all
low-level networking stuff" rather than introducing people to
a set of packages working together where some piece of functionality
is here and some other piece is there.
Part of https://github.com/ooni/probe/issues/1591
I have recently seen a data race related our way of
mutating the outgoing request to set the host header.
Unfortunately, I've lost track of the race output,
because I rebooted my Linux box before saving it.
Though, after inspecting why and and where we're mutating
outgoing requets, I've found that:
1. we add the host header when logging to have it logged,
which is not a big deal since we already emit the URL
rather than just the URL path when logging a request, and
so we can safely zap this piece of code;
2. as a result, in measurements we may omit the host header
but again this is pretty much obvious from the URL itself
and so it should not be very important (nonetheless,
avoid surprises and keep the existing behavior);
3. when the User-Agent header is not set, we default to
a `miniooni/0.1.0-dev` user agent, which is probably not
very useful anyway, so we can actually remove it.
Part of https://github.com/ooni/probe/issues/1733 (this diff
has been extracted from https://github.com/ooni/probe-cli/pull/506).
I discovered which transport were used by apitool and made sure he gets the same transports now. While there, I discovered an issue with ooni/oohttp that has been fixed with cba9b1ce5e.
Part of https://github.com/ooni/probe/issues/1591
We need still to add similar wrappers to internal/netxlite but we
will adopt a saner approach to error wrapping this time.
See https://github.com/ooni/probe/issues/1591
Like before, do not touch the rest of the tree. Rather create
compatibility types declared as legacy.
We will soon be able to close idle connections for an HTTP3
transport using any kind of resolvers more easily.
See https://github.com/ooni/probe/issues/1591
This basically adapts already existing code inside websteps to
instead be into the netxlite package, where it belongs.
In the process, abstract the TLSDialer but keep a reference to the
previous name to avoid refactoring existing code (just for now).
While there, notice that the right name is CloseIdleConnections (i.e.,
plural not singular) and change the name.
While there, since we abstracted TLSDialer to be an interface, create
suitable factories for making a TLSDialer type from a Dialer and a
TLSHandshaker.
See https://github.com/ooni/probe/issues/1591
Like we did before for the resolver, a dialer should propagate the
request to close idle connections to underlying types.
See https://github.com/ooni/probe/issues/1591
We would like to refactor the code so that a DoH resolver owns the
connections of its underlying HTTP client.
To do that, we need first to incorporate CloseIdleConnections
into the Resolver model. Then, we need to add the same function
to all netxlite types that wrap a Resolver type.
At the same time, we want the rest of the code for now to continue
with the simpler definition of a Resolver, now called ResolverLegacy.
We will eventually propagate this change to the rest of the tree
and simplify the way in which we manage Resolvers.
To make this possible, we introduce a new factory function that
adapts a ResolverLegacy to become a Resolver.
See https://github.com/ooni/probe/issues/1591.
I needed to add some tests as integration tests due to circular
imports, but this is ~fine because we quite likely want many
integration tests in the errorsx package anyway.
Part of https://github.com/ooni/probe/issues/1505.
This diff is part of https://github.com/ooni/probe/issues/1505.
You will notice that I have not adapted all the (great) tests we had
previously. They should live at another layer, and namely the one that
deals with performing measurements.
When I'm refactoring such a layer I'll ensure those tests that I have
not adapted here are reintroduced into the tree.
Auto-configure every relevant TLS field as close as possible to
where it's actually used.
As a side effect, add support for mocking the creation of a TLS
connection, which should possibly be useful for uTLS?
Work that is part of https://github.com/ooni/probe/issues/1505
What do I mean by pivoting? Netx is currently organized by row:
```
| dialer | quicdialer | resolver | ...
saving | | | | ...
errorwrapping | | | | ...
logging | | | | ...
mocking/sys | | | | ...
```
Every row needs to implement saving, errorwrapping, logging, mocking (or
adapting to the system or to some underlying library).
This causes cross package dependencies and, in turn, complexity. For
example, we need the `trace` package for supporting saving.
And `dialer`, `quickdialer`, et al. need to depend on such a package.
The same goes for errorwrapping.
This arrangement further complicates testing. For example, I am
currently working on https://github.com/ooni/probe/issues/1505 and
I realize it need to repeat integration tests in multiple places.
Let's say instead we pivot the above matrix as follows:
```
| saving | errorwrapping | logging | ...
dialer | | | | ...
quicdialer | | | | ...
logging | | | | ...
mocking/sys | | | | ...
...
```
In this way, now every row contains everything related to a specific
action to perform. We can now share code without relying on extra
support packages. What's more, we can write tests and, judding from
the way in which things are made, it seems we only need integration
testing in `errorwrapping` because it's where data quality matters
whereas, in all other cases, unit testing is fine.
I am going, therefore, to proceed with these changes and "pivot"
`netx`. Hopefully, it won't be too painful.
* refactor(netx/dialer): hide implementation complexity
This follows the blueprint of `module.Config` and `nodule.New`
described at https://github.com/ooni/probe/issues/1591.
* fix: ndt7 bug where we were not using the right resolver
* fix(legacy/netx): clarify irrelevant implementation change
* fix: improve comments
* fix(hhfm): do not use dialer.New b/c it breaks it
Unclear to me why this is happening. Still, improve upon the
previous situation by adding a timeout.
It does not seem a priority to look into this issue now.
We already configure a timeout in the underlying dialer, hence
there's no point in keeping the TimeoutDialer around.
Part of https://github.com/ooni/probe/issues/1507
We're currently use jafar for QA and jafar is a better mechanism,
even though it is not portable outside of Linux.
This self censorship mechanism was less cool and added a bunch
of (also cognitive) complexity to netx.
If we ever want to go down a self censorship like road, we probably
want to do as little work as possible in the problem and as much
work as possible inside a helper like jafar.
Part of https://github.com/ooni/probe/issues/1591.
