This diff fixes the way in which we print JSON results inside
`ooniprobe show <ID>` by using the "%s" fmt specifier rather than
using the JSON string itself as the format string.
See https://github.com/ooni/probe/issues/2082
FWIW, `ooniprobe show --batch <ID>` was already WAI.
* Passed the TestHelpers field to RunAsyc and MeasureAsync. This reflects the test_helpers in the measurement.
* Spec already contains the correct output.
See https://github.com/ooni/probe/issues/2073
Co-authored-by: decfox <decfox>
Previously, the DNS decoder did not check whether it was parsing
a DNS query or a DNS response, which was wrong.
As a side note, it seems I am using "reply" in the codebase instead
of "response". The latter seems correct DNS terminology.
This diff has been extracted from 9249d14f80
See https://github.com/ooni/probe/issues/2096.
This diff has been extracted and adapted from 8848c8c516
The reason to prefer composition over embedding is that we want the
build to break if we add new methods to interfaces we define. If the build
does not break, we may forget about wrapping methods we should
actually be wrapping. I noticed this issue inside netxlite when I was working
on websteps-illustrated and I added support for NS and PTR queries.
See https://github.com/ooni/probe/issues/2096
While there, perform comprehensive netxlite code review
and apply minor changes and improve the docs.
This diff has been extracted from c2f7ccab0e
See https://github.com/ooni/probe/issues/2096
While there, export DecodeReply to decode a raw reply without
interpreting the Rcode or parsing the results, which seems a
nice extra feature to have to more flexibly parse DNS replies
in other parts of the codebase.
This error occurred for example when querying kazemjalali.com
in websteps measurements run from Iran.
This error is relatively uncommon, but it still makes sense to
create a specific mapping rule for it.
Originally: 4269e82fbd
See https://github.com/ooni/probe/issues/2096
I've seen some measurements returning some IP addresses for HTTPSSvc
queries but not returning any ALPN value.
For example:
```
% d4
decoding DNS round trip 0:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 57768
;; flags: rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;psiphon.ca. IN HTTPS
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 57768
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;psiphon.ca. IN HTTPS
;; ANSWER SECTION:
psiphon.ca. 121 IN A 31.13.85.53
```
Now, the response is clearly bogus. At the time of this writing that
IP address belongs to Facebook. This measurement has been collected in
China, so it's expected for the GFW to behave like this.
Yet, I don't feel like it's accurate to report this measurement as a
"no answer" response. Rather, this response is a valid one containing
a clearly invalid IP address and should be flagged as such.
Originally: 57a023bcf4
See https://github.com/ooni/probe/issues/2096
This diff fixes the short-circuit-IP-addr resolver to
correctly handle IP addrs during LookupHTTPS.
The original diff was: 2b51d144bf
See https://github.com/ooni/probe/issues/2096
While there, add unit tests for IPv6.
This diff re-implements the vanilla_tor experiment. This experiment was
part of the ooni/probe-legacy implementation.
The reference issue is https://github.com/ooni/probe/issues/803. We didn't
consider the possible improvements mentioned by the
https://github.com/ooni/probe/issues/803#issuecomment-598715694 comment,
which means we'll need to create a follow-up issue for them. We will
then decide whether, when, and how to implement those follow-up measurements
either into `vanilla_tor` or into the existing `tor` experiment.
This novel `vanilla_tor` implementation emits test_keys that are mostly
compatible with the original implementation, however:
1. the `timeout` is a `float64` rather than integer (but the default
timeout is an integer, so there are no JSON-visible changes);
2. the `tor_log` string is gone and replaced by the `tor_logs` list
of strings, which contains the same information;
3. the definition of `error` has been augmented to include the
case in which there is an unknown error;
4. the implementation of vanilla_tor mirrors closely the one of torsf
and we have taken steps to make the two implementations as comparable
as possible in terms of the generated JSON measurement.
The main reason why we replaced `tor_log` with `tor_logs` are:
1. that `torsf` already used that;
2. that reading the JSON is easier with this implementation compared to
an implementation where all logs are into the same string.
If one is processing the new data format using Python, then it will
not be difficult convert `tor_log` to `tor_logs`. In any case, because
we extract the most interesting fields (e.g., the percentage of the
bootstrap where tor fails), it seems that logs are probably more useful
as something you want to read in edge cases (I guess).
Also, because we want `torsf` and `vanilla_tor` to have similar JSONs,
we renamed `torsf`'s `default_timeout` to `timeout`. This change has little
to none real-world impact, because no stable version of OONI Probe has
ever shipped a `torsf` producing the `default_timeout` field.
Regarding the structure of this diff, we have:
1. factored code to parse tor logs into a separate package;
2. implemented `vanilla_tor` as a stripped down `torsf` and added further
changes to ensure compatibility with the previous `vanilla_tor`'s data format;
3. improved `torsf` to merge back the changes in `vanilla_tor`, so the two
data formats of the two experiments are as similar as possible.
We believe producing as similar as possible data formats helps anyone who's
reading measurements generated by both experiments.
We have retained/introduced `vanilla_tor`'s `error` field, which is not very
useful when one has a more precise failure but is still what `vanilla_tor`
used to emit, so it makes sense to also have this field.
In addition to changing the implementation, we also updated the specs.
As part of our future work, we may want to consider factoring the common code
of these two experiments into the same underlying support library.
* Upgrade to github.com/upper/db/v4
* fix(oonitest): repair imports after merge
Oops, okay, it seems the merge did not preserve all the import
changes, so let's ensure we use the right imports here!
* cleanup(go.mod): don't refer to upper.io/db/v3
These lines didn't disappear previously because the merge commit
failed to remove all references to upper.io/db/v3.
Co-authored-by: stergem <sgemelas@protonmail.com>
Co-authored-by: Simone Basso <bassosimone@gmail.com>
* quic-go upgrade: replaced Session/EarlySession with Connection/EarlyConnection
* quic-go upgrade: added context to RoundTripper.Dial
* quic-go upgrade: made corresponding changes to tutorial
* quic-go upgrade: changed sess variable instances to qconn
* quic-go upgrade: made corresponding changes to tutorial
* cleanup: remove unnecessary comments
Those comments made sense in terms of illustrating the changes
but they're going to be less useful once we merge.
* fix(go.mod): apparently we needed `go1.18.1 mod tidy`
VSCode just warned me about this. It seems fine to apply this
change as part of the pull request at hand.
* cleanup(netxlite): http3dialer can be removed
We used to use http3dialer to glue a QUIC dialer, which had a
context as its first argument, to the Dial function used by the
HTTP3 transport, which did not have a context as its first
argument.
Now that HTTP3 transport has a Dial function taking a context as
its first argument, we don't need http3dialer
anymore, since we can use the QUIC dialer directly.
Cc: @DecFox
* Revert "cleanup(netxlite): http3dialer can be removed"
This reverts commit c62244c620cee5fadcc2ca89d8228c8db0b96add
to investigate the build failure mentioned at
https://github.com/ooni/probe-cli/pull/715#issuecomment-1119450484
* chore(netx): show that test was already broken
We didn't see the breakage before because we were not using
the created transport, but the issue of using a nil dialer was
already present before, we just didn't see it.
Now we understand why removing the http3transport in
c62244c620cee5fadcc2ca89d8228c8db0b96add did cause the
breakage mentioned at
https://github.com/ooni/probe-cli/pull/715#issuecomment-1119450484
* fix(netx): convert broken integration test to working unit test
There's no point in using the network here. Add a fake dialer that
breaks and ensure we're getting the expected error.
We've now improved upon the original test because the original test was
not doing anything while now we're testing whether we get back a QUIC
dialer that _can be used_.
After this commit, I can then readd the cleanup commit
c62244c620cee5fadcc2ca89d8228c8db0b96add and it won't be
broken anymore (at least, this is what I expected to happen).
* Revert "Revert "cleanup(netxlite): http3dialer can be removed""
This reverts commit 0e254bfc6ba3bfd65365ce3d8de2c8ec51b925ff
because now we should have fixed the broken test.
Co-authored-by: decfox <decfox>
Co-authored-by: Simone Basso <bassosimone@gmail.com>
* tls_handshakes: add IP addresses
* tls_handshakes: extract ip from tcp-connect
* tls_handshake: switched to trace event
* saver.go: get remoteAddr before handshake
Not sure whether this is strictly necessary, but I'd rather take the
remoteAddr before calling Handshake, just in case a future version
of the handshake closes the `conn`. In such a case, `conn.RemoteAddr`
would return `nil` and we would crash here.
This occurred to me while reading once again the diff before merging.
Co-authored-by: decfox <decfox>
Co-authored-by: Simone Basso <bassosimone@gmail.com>
This diff changes the software name used by unattended runs for which
we did not override the default software name (`ooniprobe-cli`).
It will become `ooniprobe-cli-unattended`. This software name is in line
with the one we use for Android, iOS, and desktop unattended runs.
While working in this diff, I introduced string constants for the run
types and a string constant for the default software name.
See https://github.com/ooni/probe/issues/2081.
Here's the squash of the following patches that enable support
for go1.18 and update our dependencies.
This diff WILL need to be backported to the release/3.14 branch.
* chore: use go1.17.8
See https://github.com/ooni/probe/issues/2067
* chore: upgrade to probe-assets@v0.8.0
See https://github.com/ooni/probe/issues/2067.
* chore: update dependencies and enable go1.18
As mentioned in 7a0d17ea91,
the tree won't build with `go1.18` unless we say it does.
So, not only here we need to update dependencies but also we
need to explicitly say `go1.18` in the `go.mod`.
This work is part of https://github.com/ooni/probe/issues/2067.
* chore(coverage.yml): run with go1.18
This change will give us a bare minimum confidence that we're
going to build our tree using version 1.18 of golang.
See https://github.com/ooni/probe/issues/2067.
* chore: update user agent used for measuring
See https://github.com/ooni/probe/issues/2067
* chore: run `go generate ./...`
See https://github.com/ooni/probe/issues/2067
* fix(dialer_test.go): make test work with go1.17 and go1.18
1. the original test wanted the dial to fail, so ensure we're not
passing any domain name to exercise dialing not resolving;
2. match the end of the error rather than the whole error string.
Tested locally with both go1.17 and go1.18.
See https://github.com/ooni/probe-cli/pull/708#issuecomment-1096447186
This change should prevent old clients (e.g., Android 6) from
failing to perform a ndt7 experiment because their internal CA
bundle is now too old.
Reference issue: https://github.com/ooni/probe/issues/2031
While there, run `go mod tidy` to fix a minor inconsistence in
the current `go.mod` file.
This diff WILL require a backport to release/3.14.
This diff forward ports 018b5de8ce10040b553f0923f70543c1071b954c, whose
original commit message follows:
- - -
The underlying issue causing https://github.com/ooni/probe/issues/2037
is that the final measurement of a web_connectivity run is not
submitted because the context expires while we're submitting it
in most cases.
In turn, this happens because a web_connectivity measurement is not
interrupted midway, since it's not interruptible. This choice is sound
in that we want to finish an in progress measurement. And this is
also why the max_runtime is never 100% accurate.
Yet, once the context is expired, the subsequent submission fails.
Fix the issue by using three contexts. The root context is the one that
the user controls. The measurement context is the one tied to the max
runtime. The submit context is tied to the max runtime plus extra slack
time to ensure we submit the measurement.
With this diff applied, I run the mobile app a couple of times and did
not notice any unsubmitted measurements. Still, more testing is also
probably required to further ensure we've properly fixed.
I'm committing this diff in the release/3.14 branch but we WILL also
need to forward port it into the master branch.
While there, since pkg/oonimkall is a large package, let us create
a doc.go file for keeping the docs.
Conflicts:
pkg/oonimkall/task.go
This diff improves the CONTRIBUTING.md after @bassosimone and @yeganathan18 had a conversation about improving the quality of our default community resources.
This experiment pings a QUIC-able host. It can be used to measure QUIC availability independently from TLS.
This is the reference issue: https://github.com/ooni/probe/issues/1994
### A QUIC PING is:
- a QUIC Initial packet with a size of 1200 bytes (minimum datagram size defined in the [RFC 9000](https://www.rfc-editor.org/rfc/rfc9000.html#initial-size)),
- with a random payload (i.e. no TLS ClientHello),
- with the version string 0xbabababa which forces Version Negotiation at the server.
QUIC-able hosts respond to the QUIC PING with a Version Negotiation packet.
The input is a domain name or an IP address. The default port used by quicping is 443, as this is the port used by HTTP/3. The port can be modified with the `-O Port=` option.
The default number of repetitions is 10, it can be changed with `-O Repetitions=`.
### Usage:
```
./miniooni -i google.com quicping
./miniooni -i 142.250.181.206 quicping
./miniooni -i 142.250.181.206 -OPort=443 quicping
./miniooni -i 142.250.181.206 -ORepetitions=2 quicping
```
The oonireport client (re-)uploads a measurement report file. This can be helpful when the measurement was not uploaded at runtime.
Usage: `./oonireport upload <file>`, where `<file>` is a json(l) file containing one OONI measurement per line.
This pull request refers to https://github.com/ooni/probe/issues/2003 and https://github.com/ooni/probe/issues/950.
Co-authored-by: Simone Basso <bassosimone@gmail.com>
