This diff changes the data format to prefer "udp" to "quic" everywhere we were previously using "quic".
Previously, the code inconsistently used "quic" for operations where we knew we were using "quic" and "udp" otherwise (e.g., for generic operations like ReadFrom).
While it would be more correct to say that a specific HTTP request used "quic" rather than "udp", using "udp" consistently allows one to see how distinct events such as ReadFrom and an handshake all refer to the same address, port, and protocol triple. Therefore, this change makes it easier to programmatically unpack a single measurement and create endpoint stats.
Before implementing this change, I discussed the problem with @hellais who mentioned that ooni/data is not currently using the "quic" string anywhere. I know that ooni/pipeline also doesn't rely on this string. The only users of this feature have been research-oriented experiments such as urlgetter, for which such a change would actually be acceptable.
See https://github.com/ooni/probe/issues/2238 and https://github.com/ooni/spec/pull/262.
## Checklist
- [x] I have read the [contribution guidelines](https://github.com/ooni/probe-cli/blob/master/CONTRIBUTING.md)
- [x] reference issue for this pull request: https://github.com/ooni/probe/issues/2158
- [x] if you changed anything related how experiments work and you need to reflect these changes in the ooni/spec repository, please link to the related ooni/spec pull request: https://github.com/ooni/spec/pull/250
## Description
This diff refactors the codebase to reimplement tlsping and tcpping
to use the step-by-step measurements style.
See docs/design/dd-003-step-by-step.md for more information on the
step-by-step measurement style.
This pull request publishes the step-by-step design document that I have been discussing with @hellais and @DecFox recently. Compared to the document that was approved, this one has been edited for readability.
While there, I figured it was also be beneficial to publish the few ooni/probe-cli related design documents we produced in the past, because they probably help someone to get acquainted with the codebase.
Reference issue for this pull request: https://github.com/ooni/probe/issues/2148
This diff refactors netx and netxlite to ensure we're not using
netxlite legacy names inside of netx.
To this end, we're cheating a bit. We're exposing a new factory to
get an unwrapped stdlib resolver rather than defining a legacy name
to export the private name of the same factory.
This is actually a fine place to stop, for now, the next and
netxlite refactoring at https://github.com/ooni/probe/issues/2121.
Before finishing the ongoing refactoring and leaving whatever
is left of netx in tree, I would like to restructure it so that
we'll have an easy time next time we need to modify it.
Currently, every functionality lives into the `netx.go` file and
we have a support file called `httptransport.go`.
I would like to reorganize by topic, instead. This would allow
future me to more easily perform topic-specific changes.
While there, improve `netx`'s documentation and duplicate some of
this documentation inside `internal/README.md` to provide pointers
to previous documentation, historical context, and some help to
understand the logic architecture of network extensions (aka `netx`).
Part of https://github.com/ooni/probe-cli/pull/396
Now that we have properly refactored the caching resolvers we can
move them into netxlite as optional resolvers created using the
proper abstract factories we just added.
This diff reduces the complexity and the code size of netx.
See https://github.com/ooni/probe/issues/2121.
For testability, replace most if-based construction logic with
calls to well-tested factories living in other packages.
While there, acknowledge that a bunch of types could now be private
and make them private, modifying the code to call the public
factories allowing to construct said types instead.
Part of https://github.com/ooni/probe/issues/2121
This diff modifies netx to stop using most netxlite resolver internals
but the internal function that creates a new, unwrapped system resolver,
which will be dealt with in a subsequent pull request.
See https://github.com/ooni/probe/issues/2121
1. Use the netxlite.NewHTTPTransport factory for creating a new
HTTP2 (and HTTP1) transport;
2. Recognize the netxlite.NewOOHTTPTransport has now become
an implementation detail so make it private;
3. Recognize that netxlite.NewHTTP3Transport should call
netxlite.WrapTransport so it returns the same typechain
returned by netxlite.NewHTTPTransport (modulo, of course,
the real underlying transport), so ensure that we are
calling netxlite.WrapTransport in NewHTTP3Transport;
4. Recognize that the table based constructor inside of
netx needs a logger to create HTTPTransport instances using
either netxlite.NewHTTP{,3}Transport so pass this argument
along and ensure it's not nil using a constructor inside
model that guarantees that;
5. Cleanup netx's tests to avoid type asserting on the
typechains returned by netxlite since we already test
that inside netxlite;
6. Recognize that now we can make more legacy names inside
of netxlite private because we don't need to use them
inside tests anymore (because of previous point).
Reference issue: https://github.com/ooni/probe/issues/2121
This diff modifies netx to use netxlite to build the TLSDialer.
Building the TLSDialer entails building a TLSHandshaker.
While there, hide netxlite names we don't want to be public
and change netx tests to test for functionality.
To this end, refactor filtering to provide an easier to
use TLS server. We don't need the complexity of proxying
rather we need to provoke specific errors.
Part of https://github.com/ooni/probe/issues/2121
* refactor: move tracex outside of engine/netx
Consistently with https://github.com/ooni/probe/issues/2121 and
https://github.com/ooni/probe/issues/2115, we can now move tracex
outside of engine/netx. The main reason why this makes sense now
is that the package is now changed significantly from the one
that we imported from ooni/probe-engine.
We have improved its implementation, which had not been touched
significantly for quite some time, and converted it to unit
testing. I will document tomorrow some extra work I'd like to
do with this package but likely could not do $soon.
* go fmt
* regen tutorials
The exercise already allowed me to notice issues such as fields not
being properly initialized by savers.
This is one of the last steps before moving tracex away from the
internal/netx package and into the internal package.
See https://github.com/ooni/probe/issues/2121
Tracex contained some fragile code that assembled HTTP measurements
from scattered events, which worked because we were sure we were
performing a single measurement at any given time.
This diff restructures the code to emit a transaction-start and a
transaction-done events only. We have basically removed all the other
events (which we were not using). We kept the transaction-start
though, because it may be useful to see it when reading events. In
any case, what matters here is that we're now using the transaction-done
event aline to generate the archival HTTP measurement.
Hence, the original issue has been addressed. We will possibly
do more refactoring in the future, but for now this seems sufficient.
Part of https://github.com/ooni/probe/issues/2121
The main issue I see inside tracex at the moment is that we
construct the HTTP measurement from separate events.
This is fragile because we cannot be sure that these events
belong to the same round trip. (Currently, they _are_ part
of the same round trip, but this is a fragile assumption and
it would be much more robust to dispose of it.)
To prepare for emitting a single event, it's imperative to
have two distinct fields for HTTP request and response headers,
which is the main contribution in this commit.
Then, we have a bunch of smaller changes including:
1. correctly naming 'response' the DNS response (instead of 'reply')
2. ensure we always use pointer receivers
Reference issue: https://github.com/ooni/probe/issues/2121
Rather than matching a string, match a type.
This is more robust considering future refactorings.
We're confident the names did not change in _this_ refactoring
because we're still testing the same strings in the tests.
Part of https://github.com/ooni/probe/issues/2121
Acknowledge that transports MAY be used in isolation (i.e., outside
of a Resolver) and add support for wrapping.
Ensure that every factory that creates an unwrapped type is named
accordingly to hopefully ensure there are no surprises.
Implement DNSTransport wrapping and use a technique similar to the
one used by Dialer to customize the DNSTransport while constructing
more complex data types (e.g., a specific resolver).
Ensure that the stdlib resolver's own "getaddrinfo" transport (1)
is wrapped and (2) could be extended during construction.
This work is part of my ongoing effort to bring to this repository
websteps-illustrated changes relative to netxlite.
Ref issue: https://github.com/ooni/probe/issues/2096
This diff modifies the system resolver to use a getaddrinf transport.
Obviously the transport is a fake, but its existence will allow us
to observe DNS events more naturally.
A lookup using the system resolver would be a ANY lookup that will
contain all the resolved IP addresses into the same response.
This change was also part of websteps-illustrated, albeit the way in
which I did it there was less clean than what we have here.
Ref issue: https://github.com/ooni/probe/issues/2096
Rather than passing functions to construct complex objects such
as Dialer and QUICDialer, pass interface implementations.
Ensure that a nil implementation does not cause harm.
Make Saver implement the correct interface either directly or
indirectly. We need to implement the correct interface indirectly
for TCP conns (or connected UDP sockets) because we have two
distinct use cases inside netx: observing just the connect event
and observing just the I/O events.
With this change, the construction of composed Dialers and
QUICDialers is greatly simplified and more obvious.
Part of https://github.com/ooni/probe/issues/2121
The code that is now into the tracex package was written a long
time ago, so let's start to make it more in line with the coding
style of packages that were written more recently.
I didn't apply all the changes I'd like to apply in a single diff
and for now I am committing just this diff.
Broadly, what we need to do is:
1. improve documentation
2. ~always use pointer receivers (object receives have the issue
that they are not mutable by accident meaning that you can mutate
them but their state do not change after the call returns, which
is potentially a source of bugs in case you later refactor to use
a pointer receiver, so always use pointer receivers)
3. ~always avoid embedding (let's say we want to avoid embedding
for types we define and it's instead fine to embed types that are
defined in the stdlib: if later we add a new method, we will not
see a broken build and we'll probably forget to add the new method
to all wrappers -- conversely, if we're wrapping rather than
embedding, we'll see a broken build and act accordingly)
4. prefer unit tests and group tests by type being tested rather
than using a flat structure for tests
There's a coverage slippage that I'll compensate in a follow-up diff where I'll focus on unit testing.
Reference issue: https://github.com/ooni/probe/issues/2121
This diff creates a new package under netx called tracex that
contains everything we need to perform measurements using events
tracing and postprocessing (which is the technique with which
we implement most network experiments).
The general idea here is to (1) create a unique package out of
all of these packages; (2) clean up the code a bit (improve tests,
docs, apply more recent code patterns); (3) move the resulting
code as a toplevel package inside of internal.
Once this is done, netx can be further refactored to avoid
subpackages and we can search for more code to salvage/refactor.
See https://github.com/ooni/probe/issues/2121
This diff modifies the construction of a dialer to allow one
to insert custom dialer wrappers into the dialers chain.
The point of the chain in which we allow custom wrappers is the
optimal one for connect, read, and write measurements.
This new design is better than the previous netx design since
we don't need to construct the whole chain manually now.
The work in this diff is part of the effort to make engine/netx
just a tiny wrapper around netxlite.
See https://github.com/ooni/probe/issues/2121.
This diff required us to move some code around, but no major
change actually happened, except better tests.
While there, I also slightly refactored ndt7's implementation and
removed the ProxyURL setting, which was actually unused.
See https://github.com/ooni/probe/issues/2121
This diff replaces engine/netx code with netxlite code in
the engine/session.go file. To this end, we needed to move
some code from engine/netx to netxlite. While there, we
did review and improve the unit tests.
A notable change in this diff is (or seems to be) that in
engine/session.go we're not filtering for bogons anymore so
that, in principle, we could believe a resolver returning
to us bogon IP addresses for OONI services. However, I did
not bother with changing bogons filtering because the
sessionresolver package is already filtering for bogons,
so it is actually okay to avoid doing that again the
session.go code. See:
https://github.com/ooni/probe-cli/blob/v3.15.0-alpha.1/internal/engine/internal/sessionresolver/resolvermaker.go#L88
There are two reference issues for this cleanup:
1. https://github.com/ooni/probe/issues/2115
2. https://github.com/ooni/probe/issues/2121
This diff refactors the DNSTransport model to receive in input a DNSQuery and return in output a DNSResponse.
The design of DNSQuery and DNSResponse takes into account the use case of a transport using getaddrinfo, meaning that we don't need to serialize and deserialize messages when using getaddrinfo.
The current codebase does not use a getaddrinfo transport, but I wrote one such a transport in the Websteps Winter 2021 prototype (https://github.com/bassosimone/websteps-illustrated/).
The design conversation that lead to producing this diff is https://github.com/ooni/probe/issues/2099
Rather than building for Android using ooni/go, we're now using
ooni/oocryto as the TLS dependency. Such a repository only forks
crypto/tls and some minor crypto packages and includes the
same set of patches that we have been using in ooni/go.
This new strategy should be better than the previous one in
terms of building for Android, because we can use the vanilla
go1.18.2 build. It also seems that it is easier to track and
merge from upstream with ooni/oocrypto than it is with ooni/go.
Should this assessment be wrong, we can revert back to the
previous scenario where we used ooni/go.
See https://github.com/ooni/probe/issues/2106 for extra context.
* quic-go upgrade: replaced Session/EarlySession with Connection/EarlyConnection
* quic-go upgrade: added context to RoundTripper.Dial
* quic-go upgrade: made corresponding changes to tutorial
* quic-go upgrade: changed sess variable instances to qconn
* quic-go upgrade: made corresponding changes to tutorial
* cleanup: remove unnecessary comments
Those comments made sense in terms of illustrating the changes
but they're going to be less useful once we merge.
* fix(go.mod): apparently we needed `go1.18.1 mod tidy`
VSCode just warned me about this. It seems fine to apply this
change as part of the pull request at hand.
* cleanup(netxlite): http3dialer can be removed
We used to use http3dialer to glue a QUIC dialer, which had a
context as its first argument, to the Dial function used by the
HTTP3 transport, which did not have a context as its first
argument.
Now that HTTP3 transport has a Dial function taking a context as
its first argument, we don't need http3dialer
anymore, since we can use the QUIC dialer directly.
Cc: @DecFox
* Revert "cleanup(netxlite): http3dialer can be removed"
This reverts commit c62244c620cee5fadcc2ca89d8228c8db0b96add
to investigate the build failure mentioned at
https://github.com/ooni/probe-cli/pull/715#issuecomment-1119450484
* chore(netx): show that test was already broken
We didn't see the breakage before because we were not using
the created transport, but the issue of using a nil dialer was
already present before, we just didn't see it.
Now we understand why removing the http3transport in
c62244c620cee5fadcc2ca89d8228c8db0b96add did cause the
breakage mentioned at
https://github.com/ooni/probe-cli/pull/715#issuecomment-1119450484
* fix(netx): convert broken integration test to working unit test
There's no point in using the network here. Add a fake dialer that
breaks and ensure we're getting the expected error.
We've now improved upon the original test because the original test was
not doing anything while now we're testing whether we get back a QUIC
dialer that _can be used_.
After this commit, I can then readd the cleanup commit
c62244c620cee5fadcc2ca89d8228c8db0b96add and it won't be
broken anymore (at least, this is what I expected to happen).
* Revert "Revert "cleanup(netxlite): http3dialer can be removed""
This reverts commit 0e254bfc6ba3bfd65365ce3d8de2c8ec51b925ff
because now we should have fixed the broken test.
Co-authored-by: decfox <decfox>
Co-authored-by: Simone Basso <bassosimone@gmail.com>
* tls_handshakes: add IP addresses
* tls_handshakes: extract ip from tcp-connect
* tls_handshake: switched to trace event
* saver.go: get remoteAddr before handshake
Not sure whether this is strictly necessary, but I'd rather take the
remoteAddr before calling Handshake, just in case a future version
of the handshake closes the `conn`. In such a case, `conn.RemoteAddr`
would return `nil` and we would crash here.
This occurred to me while reading once again the diff before merging.
Co-authored-by: decfox <decfox>
Co-authored-by: Simone Basso <bassosimone@gmail.com>
This diff forward ports b6db4f64dc83a2a27ee3ce6bba5ac93db922832d, whose
original log message is the following:
- - -
We're now using ooni/oohttp as our HTTP library in most cases.
A limitation of this library is that net/http/httptrace does not
work very well and reliably because (1) we need to use oohttp's
version of that code and (2) we cannot observe net events.
I noticed this fact because an integration test for collecting
HTTP performance metrics was broken.
The best solution here is to remove this functionality, since
it was basically unused in the repository. Only some integration
tests inside urlgetter bothered with these metrics.
A more clinical fix would have been to use ooni/oohttp/httptrace
instead of net/http/httptrace in the stdlib, but it does not
seem to be a good idea, given that those metrics were not used.
With this diff applied, we'll further reduce the number of locally
failing integration tests to just jafar-specific tests.
This diff WILL need to be forwardported to `master`.
This diff contains significant improvements over the previous
implementation of the torsf experiment.
We add support for configuring different rendezvous methods after
the convo at https://github.com/ooni/probe/issues/2004. In doing
that, I've tried to use a terminology that is consistent with the
names being actually used by tor developers.
In terms of what to do next, this diff basically instruments
torsf to always rendezvous using domain fronting. Yet, it's also
possible to change the rendezvous method from the command line,
when using miniooni, which allows to experiment a bit more. In the
same vein, by default we use a persistent tor datadir, but it's
also possible to use a temporary datadir using the cmdline.
Here's how a generic invocation of `torsf` looks like:
```bash
./miniooni -O DisablePersistentDatadir=true \
-O RendezvousMethod=amp \
-O DisableProgress=true \
torsf
```
(The default is `DisablePersistentDatadir=false` and
`RendezvousMethod=domain_fronting`.)
With this implementation, we can start measuring whether snowflake
and tor together can boostrap, which seems the most important thing
to focus on at the beginning. Understanding why the bootstrap most
often does not converge with a temporary datadir on Android devices
remains instead an open problem for now. (I'll also update the
relevant issues or create new issues after commit this.)
We also address some methodology improvements that were proposed
in https://github.com/ooni/probe/issues/1686. Namely:
1. we record the tor version;
2. we include the bootstrap percentage by reading the logs;
3. we set the anomaly key correctly;
4. we measure the bytes send and received (by `tor` not by `snowflake`, since
doing it for snowflake seems more complex at this stage).
What remains to be done is the possibility of including Snowflake
events into the measurement, which is not possible until the new
improvements at common/event in snowflake.git are included into a
tagged version of snowflake itself. (I'll make sure to mention
this aspect to @cohosh in https://github.com/ooni/probe/issues/2004.)
This diff introduces a new package called `./internal/archival`. This package collects data from `./internal/model` network interfaces (e.g., `Dialer`, `QUICDialer`, `HTTPTransport`), saves such data into an internal tabular data format suitable for on-line processing and analysis, and allows exporting data into the OONI data format.
The code for collecting and the internal tabular data formats are adapted from `measurex`. The code for formatting and exporting OONI data-format-compliant structures is adapted from `netx/archival`.
My original objective was to _also_ (1) fully replace `netx/archival` with this package and (2) adapt `measurex` to use this package rather than its own code. Both operations seem easily feasible because: (a) this code is `measurex` code without extensions that are `measurex` related, which will need to be added back as part of the process; (b) the API provided by this code allows for trivially converting from using `netx/archival` to using this code.
Yet, both changes should not be taken lightly. After implementing them, there's need to spend some time doing QA and ensuring all nettests work as intended. However, I am planning a release in the next two weeks, and this QA task is likely going to defer the release. For this reason, I have chosen to commit the work done so far into the tree and defer the second part of this refactoring for a later moment in time. (This explains why the title mentions "1/N").
On a more high-level perspective, it would also be beneficial, I guess, to explain _why_ I am doing these changes. There are two intertwined reasons. The first reason is that `netx/archival` has shortcomings deriving from its original https://github.com/ooni/netx legacy. The most relevant shortcoming is that it saves all kind of data into the same tabular structure named `Event`. This design choice is unfortunate because it does not allow one to apply data-type specific logic when processing the results. In turn, this choice results in complex processing code. Therefore, I believe that replacing the code with event-specific data structures is clearly an improvement in terms of code maintainability and would quite likely lead us to more confidently change and evolve the codebase.
The second reason why I would like to move forward these changes is to unify the codepaths used for measuring. At this point in time, we basically have two codepaths: `./internal/engine/netx` and `./internal/measurex`. They both have pros and cons and I don't think we want to rewrite whole experiments using `netx`. Rather, what we probably want is to gradually merge these two codepaths such that `netx` is a set of abstractions on top of `measurex` (which is more low-level and has a more-easily-testable design). Because saving events and generating an archival data format out of them consists of at least 50% of the complexity of both `netx` and `measurex`, it seems reasonable to unify this archival-related part of the two codebases as the first step.
At the highest level of abstraction, these changes are part of the train of changes which will eventually lead us to bless `websteps` as a first class citizen in OONI land. Because `websteps` requires different underlying primitives, I chose to develop these primitives from scratch rather than wrestling with `netx`, which used another model. The model used by `websteps` is that we perform each operation in isolation and immediately we save the results, while `netx` creates whole data structures and collects all the events happening via tracing. We believe the model used by `websteps` to be better because it does not require your code to figure out everything that happened after the measurement, which is a source of subtle bugs in the current implementation. So, when I started implementing websteps I extracted the bits of `netx` that could also be beneficial to `websteps` into a separate library, thus `netxlite` was born.
The reference issue describing merging the archival of `netx` and `measurex` is https://github.com/ooni/probe/issues/1957. As of this writing the issue still references the original plan, which I could not complete by the end of this Sprint, so I am going to adapt the text of the issue to only refer to what was done in here next. Of course, I also need follow-up issues.
* chore(netxlite): add currently failing test case
This diff introduces a test cases that will fail because of the reason
explained in https://github.com/ooni/probe/issues/1965.
* chore(netxlite/iox_test.go): add failing unit tests
These tests directly show how the Go implementation of ReadAll
and Copy has the issue of checking for io.EOF equality.
* fix(netxlite): make {ReadAll,Copy}Context robust to wrapped io.EOF
The fix is simple: we just need to check for `errors.Is(err, io.EOF)`
after either io.ReadAll or io.Copy has returned. When this condition is
true, we need to convert the error back to `nil` as it ought to be.
While there, observe that the unit tests I committed in the previous
commit are wrongly asserting that the error must be wrapped. This
assertion is not correct, because in both cases we have just ensured
that the returned error is `nil` (i.e., success).
See https://github.com/ooni/probe/issues/1965.
* cleanup: remove previous workaround for wrapped io.EOF
These workarounds were partial, meaning that they would cover some
cases in which the issue occurred but not all of them.
Handling the problem in `netxlite.{ReadAll,Copy}Context` is the
right thing to do _as long as_ we always use these functions instead
of `io.{ReadAll,Copy}`.
This is why it's now important to ensure we clearly mention that
inside of the `CONTRIBUTING.md` guide and to also ensure that we're
not using these functions in the code base.
* fix(urlgetter): repair tests who assumed to see EOF error
Now that we have established that we should normalize EOF when
reading bodies like the stdlib does and now that it's clear why
our behavior diverged from the stdlib, we also need to repair
all the tests that assumed this incorrect behavior.
* fix(all): don't use io{,util}.{Copy,ReadAll}
* feat: add checks to ensure we don't use io.{Copy,ReadAll}
* doc(netxlite): document we know how to deal w/ wrapped io.EOF
* fix(nocopyreadall.bash): add exception for i/n/iox.go
The DNSClient type existed because the Resolver type did not
include CloseIdleConnections in its signature.
Now that Resolver includes CloseIdleConnections, the DNSClient
type has become unnecessary and can be safely removed.
See https://github.com/ooni/probe/issues/1956.
We recently started moving core data structures inside of the
internal/model package as detailed in https://github.com/ooni/probe/issues/1885.
The chief reason to do that is to have a set of fundamental
shared data types to help us rationalize the codebase.
This specific diff moves internal/netx/archival's core data types
inside the internal/model package. While there, it also refactors the
existing tests to improve their quality. Additionally, we also added
an extra test to ensure `ArchivalHTTPBody` is an alias for
`ArchivalMaybeBinaryData`, which is required to ensure the
custom JSON serialization process works for it.
We're doing that because both internal/netx/archival and
internal/measurex define their own archival data structures.
We developed measurex using its own structures because it
allowed to iterate more quickly. Now that we have sketched
out measurex, the time has come to consolidate.
My overall aim is to spend a few more hours this week on
engineering measurex. This work is preliminary work before
we finish up both measurex and websteps.
We described this cleanup in https://github.com/ooni/probe/issues/1957.
This diff addresses two items of https://github.com/ooni/probe/issues/1956:
> - [ ] we can remove legacy names from `./internal/engine/netx/resolver/legacy.go`
>
> - [ ] we can remove `DialTLSContext` from `./internal/engine/netx/resolver/tls_test.go`
More cleanups may follow.
This is another cleanup point mentioned by https://github.com/ooni/probe/issues/1956.
While there, fix a bunch of comments in jafar that were incorrectly
referring to the netx package name.
This diff addresses another point of https://github.com/ooni/probe/issues/1956:
> - [ ] observe that we're still using a bunch of private interfaces for common interfaces such as the `Dialer`, so we can get rid of these private interfaces and always use the ones in `model`, which allows us to remove a bunch of legacy wrappers
Additional cleanups may still be possible. The more I cleanup, the more I see
there's extra legacy code we can dispose of (which seems good?).
This diff implements the first two cleanups defined at https://github.com/ooni/probe/issues/1956:
> - [ ] observe that `netxlite` and `netx` differ in error wrapping only in the way in which we set `ErrWrapper.Operation`. Observe that the code using `netxlite` does not care about such a field. Therefore, we can modify `netxlite` to set such a field using the code of `netx` and we can remove `netx` specific code for errors (which currently lives inside of the `./internal/engine/legacy/errorsx` package
>
> - [ ] after we've done the previous cleanup, we can make all the classifiers code private, since there's no code outside `netxlite` that needs them
A subsequent diff will address the remaining cleanup.
While there, notice that there are failing, unrelated obfs4 tests, so disable them in short mode. (I am confident these tests are unrelated because they fail for me when running test locally from the `master` branch.)
This commit completely removes the original netx implementation,
which was only used by `tor`, since this has changed in
https://github.com/ooni/probe-cli/pull/652.
The original netx implementation was my first attempt at performing
network measurements using Go. It started its life inside of the
https://github.com/ooni/netx repository. It was later merged into
the https://github.com/ooni/probe-engine repository. It finally
ended up into this repository when we merged probe-engine with it.
The main issue with the original implementation is that it was
a bit too complex and used channels where they were probably not
necessary. Because of that, later I introduced a second netx
implementation, which currently lives in ./internal/engine/netx.
The current netx implementation, the third one, lives in the
./internal/netxlite package. We are currently working to replace
the second implementation with the third one, but this is happening
at a slow pace. Also, the second implementation does not have big
maintenance concerns but it's just a bit too bureaucratic to use
since it involves creating lots of `Config` structures.
The reference issue is probably https://github.com/ooni/probe/issues/1688,
since this diff has been enabled by rewriting Tor to use `measurex`
(a library living on top of `netxlite`).
