* refactor: move tracex outside of engine/netx
Consistently with https://github.com/ooni/probe/issues/2121 and
https://github.com/ooni/probe/issues/2115, we can now move tracex
outside of engine/netx. The main reason why this makes sense now
is that the package is now changed significantly from the one
that we imported from ooni/probe-engine.
We have improved its implementation, which had not been touched
significantly for quite some time, and converted it to unit
testing. I will document tomorrow some extra work I'd like to
do with this package but likely could not do $soon.
* go fmt
* regen tutorials
This diff creates a new package under netx called tracex that
contains everything we need to perform measurements using events
tracing and postprocessing (which is the technique with which
we implement most network experiments).
The general idea here is to (1) create a unique package out of
all of these packages; (2) clean up the code a bit (improve tests,
docs, apply more recent code patterns); (3) move the resulting
code as a toplevel package inside of internal.
Once this is done, netx can be further refactored to avoid
subpackages and we can search for more code to salvage/refactor.
See https://github.com/ooni/probe/issues/2121
This diff addresses another point of https://github.com/ooni/probe/issues/1956:
> - [ ] observe that we're still using a bunch of private interfaces for common interfaces such as the `Dialer`, so we can get rid of these private interfaces and always use the ones in `model`, which allows us to remove a bunch of legacy wrappers
Additional cleanups may still be possible. The more I cleanup, the more I see
there's extra legacy code we can dispose of (which seems good?).
This diff implements the first two cleanups defined at https://github.com/ooni/probe/issues/1956:
> - [ ] observe that `netxlite` and `netx` differ in error wrapping only in the way in which we set `ErrWrapper.Operation`. Observe that the code using `netxlite` does not care about such a field. Therefore, we can modify `netxlite` to set such a field using the code of `netx` and we can remove `netx` specific code for errors (which currently lives inside of the `./internal/engine/legacy/errorsx` package
>
> - [ ] after we've done the previous cleanup, we can make all the classifiers code private, since there's no code outside `netxlite` that needs them
A subsequent diff will address the remaining cleanup.
While there, notice that there are failing, unrelated obfs4 tests, so disable them in short mode. (I am confident these tests are unrelated because they fail for me when running test locally from the `master` branch.)
Since https://github.com/ooni/probe-cli/pull/527, if an experiment
returns an error, the corresponding measurement is not submitted since
the semantics of returning an error is that something fundamental
went wrong (e.g., we could not parse the input URL).
This diff ensures that all experiments only return and error when
something fundamental was wrong and return nil otherwise.
Reference issue: https://github.com/ooni/probe/issues/1808.
## Checklist
- [x] I have read the [contribution guidelines](https://github.com/ooni/probe-cli/blob/master/CONTRIBUTING.md)
- [x] reference issue for this pull request: https://github.com/ooni/probe/issues/1885
- [x] related ooni/spec pull request: N/A
Location of the issue tracker: https://github.com/ooni/probe
## Description
This PR contains a set of changes to move important interfaces and data types into the `./internal/model` package.
The criteria for including an interface or data type in here is roughly that the type should be important and used by several packages. We are especially interested to move more interfaces here to increase modularity.
An additional side effect is that, by reading this package, one should be able to understand more quickly how different parts of the codebase interact with each other.
This is what I want to move in `internal/model`:
- [x] most important interfaces from `internal/netxlite`
- [x] everything that was previously part of `internal/engine/model`
- [x] mocks from `internal/netxlite/mocks` should also be moved in here as a subpackage
Here we're refactoring stunreachability to not provide internally a
default input and to take in input an URL rather than a string.
The related ooni/spec change is https://github.com/ooni/spec/pull/227.
This diff has been extracted from https://github.com/ooni/probe-cli/pull/539.
Because the original diff was large, I'm splitting it in a set of
more easily manageable diffs.
The reference issue is https://github.com/ooni/probe/issues/1814, which
is complex enough to require us to proceed incrementally.
This diff WILL need to be backported to release/3.11.
When preparing a tutorial for netxlite, I figured it is easier
to tell people "hey, this is the package you should use for all
low-level networking stuff" rather than introducing people to
a set of packages working together where some piece of functionality
is here and some other piece is there.
Part of https://github.com/ooni/probe/issues/1591
We need still to add similar wrappers to internal/netxlite but we
will adopt a saner approach to error wrapping this time.
See https://github.com/ooni/probe/issues/1591
The legacy part for now is internal/errorsx. It will stay there until
I figure out whether it also needs some extra bug fixing.
The good part is now in internal/netxlite/errorsx and contains all the
logic for mapping errors. We need to further improve upon this logic
by writing more thorough integration tests for QUIC.
We also need to copy the various dialer, conn, etc adapters that set
errors. We will put them inside netxlite and we will generate errors in
a way that is less crazy with respect to the major operation. (The
idea is to always wrap, given that now we measure in an incremental way
and we don't measure every operation together.)
Part of https://github.com/ooni/probe/issues/1591
* fix(pkg.go.dev): import a subpackage containing the assets
We're trying to fix this issue that pkg.go.dev does not build.
Thanks to @hellais for this very neat idea! Let's keep our
fingers crossed and see whether it fixes!
* feat: use embedded geoip databases
Closes https://github.com/ooni/probe/issues/1372.
Work done as part of https://github.com/ooni/probe/issues/1369.
* fix(assetsx): add tests
* feat: simplify and just vendor uncompressed DBs
* remove tests that seems not necessary anymore
* fix: run go mod tidy
* Address https://github.com/ooni/probe-cli/pull/260/files#r605181364
* rewrite a test in a better way
* fix: gently cleanup the legacy assetsdir
Do not remove the whole directory with brute force. Just zap the
files whose name we know. Then attempt to delete the legacy directory
as well. If not empty, just fail. This is fine because it means the
user has stored other files inside the directory.
* fix: create .miniooni if missing
* MVP of a signal messenger test
* Add minimal signal test unit tests
* Add Signal test to the im nettest group
* Add test for https://sfu.voip.signal.org/
* Fix bug in client-side determination of blocking status
* Add uptime.signal.org to the test targets
* Add more tests
* Check for invalid CA being passed
* Check that the update function works as expected
* Update internal/engine/experiment/signal/signal_test.go
Co-authored-by: Simone Basso <bassosimone@gmail.com>
* fix: back out URL we shouldn't have changed
When merging probe-engine into probe-cli, we changed too many URLs
and some of them should not have been changed.
I noticed this during the review of Signal and I choose to add
this commit to revert such changes.
While there, make sure the URL of the experiment is OK.
* fix(signal): reach 100% of coverage
Just so that we can focus on areas of the codebase where we need
more coverage, let us avoid missing an easy line to test.
Co-authored-by: Simone Basso <bassosimone@gmail.com>
This is how I did it:
1. `git clone https://github.com/ooni/probe-engine internal/engine`
2. ```
(cd internal/engine && git describe --tags)
v0.23.0
```
3. `nvim go.mod` (merging `go.mod` with `internal/engine/go.mod`
4. `rm -rf internal/.git internal/engine/go.{mod,sum}`
5. `git add internal/engine`
6. `find . -type f -name \*.go -exec sed -i 's@/ooni/probe-engine@/ooni/probe-cli/v3/internal/engine@g' {} \;`
7. `go build ./...` (passes)
8. `go test -race ./...` (temporary failure on RiseupVPN)
9. `go mod tidy`
10. this commit message
Once this piece of work is done, we can build a new version of `ooniprobe` that
is using `internal/engine` directly. We need to do more work to ensure all the
other functionality in `probe-engine` (e.g. making mobile packages) are still WAI.
Part of https://github.com/ooni/probe/issues/1335
