This diff refactors netx and netxlite to ensure we're not using
netxlite legacy names inside of netx.
To this end, we're cheating a bit. We're exposing a new factory to
get an unwrapped stdlib resolver rather than defining a legacy name
to export the private name of the same factory.
This is actually a fine place to stop, for now, the next and
netxlite refactoring at https://github.com/ooni/probe/issues/2121.
For testability, replace most if-based construction logic with
calls to well-tested factories living in other packages.
While there, acknowledge that a bunch of types could now be private
and make them private, modifying the code to call the public
factories allowing to construct said types instead.
Part of https://github.com/ooni/probe/issues/2121
This diff required us to move some code around, but no major
change actually happened, except better tests.
While there, I also slightly refactored ndt7's implementation and
removed the ProxyURL setting, which was actually unused.
See https://github.com/ooni/probe/issues/2121
The objective is to make PR checks run much faster.
See https://github.com/ooni/probe/issues/2113 for context.
Regarding netxlite's tests:
Checking for every commit on master or on a release branch is
good enough and makes pull requests faster than one minute since
netxlite for windows is now 1m slower than coverage.
We're losing some coverage but coverage from integration tests
is not so good anyway, so I'm not super sad about this loss.
This change should prevent old clients (e.g., Android 6) from
failing to perform a ndt7 experiment because their internal CA
bundle is now too old.
Reference issue: https://github.com/ooni/probe/issues/2031
While there, run `go mod tidy` to fix a minor inconsistence in
the current `go.mod` file.
This diff WILL require a backport to release/3.14.
This diff addresses another point of https://github.com/ooni/probe/issues/1956:
> - [ ] observe that we're still using a bunch of private interfaces for common interfaces such as the `Dialer`, so we can get rid of these private interfaces and always use the ones in `model`, which allows us to remove a bunch of legacy wrappers
Additional cleanups may still be possible. The more I cleanup, the more I see
there's extra legacy code we can dispose of (which seems good?).
Since https://github.com/ooni/probe-cli/pull/527, if an experiment
returns an error, the corresponding measurement is not submitted since
the semantics of returning an error is that something fundamental
went wrong (e.g., we could not parse the input URL).
This diff ensures that all experiments only return and error when
something fundamental was wrong and return nil otherwise.
Reference issue: https://github.com/ooni/probe/issues/1808.
## Checklist
- [x] I have read the [contribution guidelines](https://github.com/ooni/probe-cli/blob/master/CONTRIBUTING.md)
- [x] reference issue for this pull request: https://github.com/ooni/probe/issues/1885
- [x] related ooni/spec pull request: N/A
Location of the issue tracker: https://github.com/ooni/probe
## Description
This PR contains a set of changes to move important interfaces and data types into the `./internal/model` package.
The criteria for including an interface or data type in here is roughly that the type should be important and used by several packages. We are especially interested to move more interfaces here to increase modularity.
An additional side effect is that, by reading this package, one should be able to understand more quickly how different parts of the codebase interact with each other.
This is what I want to move in `internal/model`:
- [x] most important interfaces from `internal/netxlite`
- [x] everything that was previously part of `internal/engine/model`
- [x] mocks from `internal/netxlite/mocks` should also be moved in here as a subpackage
When preparing a tutorial for netxlite, I figured it is easier
to tell people "hey, this is the package you should use for all
low-level networking stuff" rather than introducing people to
a set of packages working together where some piece of functionality
is here and some other piece is there.
Part of https://github.com/ooni/probe/issues/1591
* fix(netxlite): make default resolver converge faster
Closes https://github.com/ooni/probe/issues/1726
* Update internal/netxlite/resolver.go
* fix(ndt7): adapt tests after previous change
Because now we're running the DNS resolution inside a goroutine
with a child context, the returned error string is different.
The previous error said we canceled the whole dialing operation,
while now we see directly that the context was canceled.
We would like to refactor the code so that a DoH resolver owns the
connections of its underlying HTTP client.
To do that, we need first to incorporate CloseIdleConnections
into the Resolver model. Then, we need to add the same function
to all netxlite types that wrap a Resolver type.
At the same time, we want the rest of the code for now to continue
with the simpler definition of a Resolver, now called ResolverLegacy.
We will eventually propagate this change to the rest of the tree
and simplify the way in which we manage Resolvers.
To make this possible, we introduce a new factory function that
adapts a ResolverLegacy to become a Resolver.
See https://github.com/ooni/probe/issues/1591.
## Description
This PR continues the refactoring of `netx` under the following principles:
1. do not break the rest of the tree and do not engage in extensive tree-wide refactoring yet
2. move under `netxlite` clearly related subpackages (e.g., `iox`, `netxmocks`)
3. move into `internal/netxlite/internal` stuff that is clearly private of `netxlite`
4. hide implementation details in `netxlite` pending new factories
5. refactor `tls` code in `netxlite` to clearly separate `crypto/tls` code from `utls` code
After each commit, I run `go test -short -race ./...` locally. Each individual commit explains what it does. I will squash, but this operation will preserve the original commit titles, so this will give further insight on each step.
## Commits
* refactor: rename netxmocks -> netxlite/mocks
Part of https://github.com/ooni/probe/issues/1591
* refactor: rename quicx -> netxlite/quicx
See https://github.com/ooni/probe/issues/1591
* refactor: rename iox -> netxlite/iox
Regenerate sources and make sure the tests pass.
See https://github.com/ooni/probe/issues/1591.
* refactor(iox): move MockableReader to netxlite/mocks
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): generator is an implementation detail
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): separate tls and utls code
See https://github.com/ooni/probe/issues/1591
* refactor(netxlite): hide most types but keep old names as legacy
With this change we avoid breaking the rest of the tree, but we start
hiding some implementation details a bit. Factories will follow.
See https://github.com/ooni/probe/issues/1591
What do I mean by pivoting? Netx is currently organized by row:
```
| dialer | quicdialer | resolver | ...
saving | | | | ...
errorwrapping | | | | ...
logging | | | | ...
mocking/sys | | | | ...
```
Every row needs to implement saving, errorwrapping, logging, mocking (or
adapting to the system or to some underlying library).
This causes cross package dependencies and, in turn, complexity. For
example, we need the `trace` package for supporting saving.
And `dialer`, `quickdialer`, et al. need to depend on such a package.
The same goes for errorwrapping.
This arrangement further complicates testing. For example, I am
currently working on https://github.com/ooni/probe/issues/1505 and
I realize it need to repeat integration tests in multiple places.
Let's say instead we pivot the above matrix as follows:
```
| saving | errorwrapping | logging | ...
dialer | | | | ...
quicdialer | | | | ...
logging | | | | ...
mocking/sys | | | | ...
...
```
In this way, now every row contains everything related to a specific
action to perform. We can now share code without relying on extra
support packages. What's more, we can write tests and, judding from
the way in which things are made, it seems we only need integration
testing in `errorwrapping` because it's where data quality matters
whereas, in all other cases, unit testing is fine.
I am going, therefore, to proceed with these changes and "pivot"
`netx`. Hopefully, it won't be too painful.
* fix(all): introduce and use iox.CopyContext
This PR is part of https://github.com/ooni/probe/issues/1417.
In https://github.com/ooni/probe-cli/pull/379 we introduced a context
aware wrapper for io.ReadAll (formerly ioutil.ReadAll).
Here we introduce a context aware wrapper for io.Copy.
* fix(humanize): more significant digits
* fix: rename humanize files to follow the common pattern
* fix aligment
* fix test
* fix(all): introduce and use iox.ReadAllContext
This improvement over the ioutil.ReadAll utility returns early
if the context expires. This enables us to unblock stuck code in
case there's censorship confounding the TCP stack.
See https://github.com/ooni/probe/issues/1417.
Compared to the functionality postulated in the above mentioned
issue, I choose to be more generic and separate limiting the
maximum body size (not implemented here) from using the context
to return early when reading a body (or any other reader).
After implementing iox.ReadAllContext, I made sure we always
use it everywhere in the tree instead of ioutil.ReadAll.
This includes many parts of the codebase where in theory we don't
need iox.ReadAllContext. Though, changing all the places makes
checking whether we're not using ioutil.ReadAll where we should
not be using it easy: `git grep` should return no lines.
* Update internal/iox/iox_test.go
* fix(ndt7): treat context errors as non-errors
The rationale is explained by the comment documenting reduceErr.
* Update internal/engine/experiment/ndt7/download.go
* refactor(netx/dialer): hide implementation complexity
This follows the blueprint of `module.Config` and `nodule.New`
described at https://github.com/ooni/probe/issues/1591.
* fix: ndt7 bug where we were not using the right resolver
* fix(legacy/netx): clarify irrelevant implementation change
* fix: improve comments
* fix(hhfm): do not use dialer.New b/c it breaks it
Unclear to me why this is happening. Still, improve upon the
previous situation by adding a timeout.
It does not seem a priority to look into this issue now.
We already configure a timeout in the underlying dialer, hence
there's no point in keeping the TimeoutDialer around.
Part of https://github.com/ooni/probe/issues/1507
We're currently use jafar for QA and jafar is a better mechanism,
even though it is not portable outside of Linux.
This self censorship mechanism was less cool and added a bunch
of (also cognitive) complexity to netx.
If we ever want to go down a self censorship like road, we probably
want to do as little work as possible in the problem and as much
work as possible inside a helper like jafar.
Part of https://github.com/ooni/probe/issues/1591.
* refactor(atomicx): move outside the engine package
After merging probe-engine into probe-cli, my impression is that we have
too much unnecessary nesting of packages in this repository.
The idea of this commit and of a bunch of following commits will instead
be to reduce the nesting and simplify the structure.
While there, improve the documentation.
* fix: always use the atomicx package
For consistency, never use sync/atomic and always use ./internal/atomicx
so we can just grep and make sure we're not risking to crash if we make
a subtle mistake on a 32 bit platform.
While there, mention in the contributing guidelines that we want to
always prefer the ./internal/atomicx package over sync/atomic.
* fix(atomicx): remove unnecessary constructor
We don't need a constructor here. The default constructed `&Int64{}`
instance is already usable and the constructor does not add anything to
what we are doing, rather it just creates extra confusion.
* cleanup(atomicx): we are not using Float64
Because atomicx.Float64 is unused, we can safely zap it.
* cleanup(atomicx): simplify impl and improve tests
We can simplify the implementation by using defer and by letting
the Load() method call Add(0).
We can improve tests by making many goroutines updated the
atomic int64 value concurrently.
* refactor(fsx): can live in the ./internal pkg
Let us reduce the amount of nesting. While there, ensure that the
package only exports the bare minimum, and improve the documentation
of the tests, to ease reading the code.
* refactor: move runtimex to ./internal
* refactor: move shellx into the ./internal package
While there, remove unnecessary dependency between packages.
While there, specify in the contributing guidelines that
one should use x/sys/execabs instead of os/exec.
* refactor: move ooapi into the ./internal pkg
* refactor(humanize): move to ./internal and better docs
* refactor: move platform to ./internal
* refactor(randx): move to ./internal
* refactor(multierror): move into the ./internal pkg
* refactor(kvstore): all kvstores in ./internal
Rather than having part of the kvstore inside ./internal/engine/kvstore
and part in ./internal/engine/kvstore.go, let us put every piece of code
that is kvstore related into the ./internal/kvstore package.
* fix(kvstore): always return ErrNoSuchKey on Get() error
It should help to use the kvstore everywhere removing all the
copies that are lingering around the tree.
* sessionresolver: make KVStore mandatory
Simplifies implementation. While there, use the ./internal/kvstore
package rather than having our private implementation.
* fix(ooapi): use the ./internal/kvstore package
* fix(platform): better documentation
* refactor: miniooni should be outside of the engine
This is part of https://github.com/ooni/probe/issues/1335. We also need
to think whether we wanna keep libminiooni and miniooni separated.
The previous use case for having a top-level libminiooni was that of
enabling others to integrate miniooni into other binaries.
This was usegul when studying internet censorship in Spain in May 2020.
I am wondering whether we should be keeping this complexity. I am not
sure about this and probably we should be killing it.
(In any case, reducing complexity is not the objective of this diff,
since I would like instead to move things around with minimal changes
and make sure we have a ~good repository organization here.)
* fix: import in libminiooni
This is how I did it:
1. `git clone https://github.com/ooni/probe-engine internal/engine`
2. ```
(cd internal/engine && git describe --tags)
v0.23.0
```
3. `nvim go.mod` (merging `go.mod` with `internal/engine/go.mod`
4. `rm -rf internal/.git internal/engine/go.{mod,sum}`
5. `git add internal/engine`
6. `find . -type f -name \*.go -exec sed -i 's@/ooni/probe-engine@/ooni/probe-cli/v3/internal/engine@g' {} \;`
7. `go build ./...` (passes)
8. `go test -race ./...` (temporary failure on RiseupVPN)
9. `go mod tidy`
10. this commit message
Once this piece of work is done, we can build a new version of `ooniprobe` that
is using `internal/engine` directly. We need to do more work to ensure all the
other functionality in `probe-engine` (e.g. making mobile packages) are still WAI.
Part of https://github.com/ooni/probe/issues/1335
